An Innovative Multi-Story Trombe Wall as a Passive Cooling and Heating Technique in Hot Climate Regions: A Simulation-Optimization Study

被引:0
作者
Abdelsamea, Ahmed [1 ,2 ]
Hassan, Hamdy [3 ,4 ]
Shokry, Hassan [1 ]
Asawa, Takashi [5 ]
Mahmoud, Hatem [1 ,6 ]
机构
[1] Egypt Japan Univ Sci & Technol, Dept Environm Engn, New Borg El Arab City 21934, Egypt
[2] Assiut Univ, Engn Fac, Dept Architecture Engn, Assiut 71515, Egypt
[3] Egypt Japan Univ Sci & Technol E JUST, Dept Energy Resources, New Borg El Arab City 21934, Egypt
[4] Assiut Univ, Fac Engn, Mech Power Engn Dept, Assiut 71515, Egypt
[5] Tokyo Inst Technol, Sch Environm & Soc, Dept Architecture & Bldg Engn, Yokohama 2268501, Japan
[6] Aswan Univ, Engn Fac, Dept Architecture Engn, Aswan 81542, Egypt
关键词
thermal comfort; energy efficiency; optimization; sustainability; hot climate; PERFORMANCE ANALYSIS; THERMAL PERFORMANCE; SYSTEM; ENERGY; BEHAVIOR; DESIGN;
D O I
10.3390/buildings15071150
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This study develops an optimized multi-story Trombe Wall (MTW) as a hybrid passive system for heating, cooling, and PV electricity generation. Unlike previous research, which focused on single-story applications and heating efficiency, this study explores MTW performance in hot climates. The methodology includes four phases: identifying TW design parameters, selecting and validating a case study, applying a two-stage optimization, and developing predictive equations. Results show that the MTW achieves up to a 1.94 degrees C decrease in cooling mode, a 1.56 degrees C increase in heating mode, a 40% increase in thermal comfort hours, and a 31% rise in annual PV electricity generation. Finally, the developed regression models demonstrated strong predictive capability (R2 = 70.2-95.73%) for discomfort and electricity generation. The proposed MTW provides a cost-effective and sustainable solution, supporting designers and researchers in optimizing building performance.
引用
收藏
页数:36
相关论文
共 72 条
[1]   Effect of air gap depth on Trombe wall system using computational fluid dynamics [J].
Abbas, Ehsan F. ;
Al-abady, Abdulnasser ;
Raja, Vijayanandh ;
AL-bonsrulah, Hussein A. Z. ;
Al-Bahrani, Mohammed .
INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES, 2022, 17 :941-949
[2]   Optimum Trombe wall thickness in the Mediterranean Tunisian context: An energetic and economic study [J].
Abbassi, Fakhreddine ;
Naili, Nabiha ;
Dehmani, Leila .
ENERGY SCIENCE & ENGINEERING, 2022, 10 (08) :2930-2939
[3]   Experimental and numerical study on thermal performance of an unvented Trombe wall associated with internal thermal fins [J].
Abbassi, Fakhreddine ;
Dehmani, Leila .
ENERGY AND BUILDINGS, 2015, 105 :119-128
[4]   Review on integrated photovoltaic-green roof solutions on urban and energy-efficient buildings in hot climate [J].
Abdalazeem, Mohamed E. ;
Hassan, Hamdy ;
Asawa, Takashi ;
Mahmoud, Hatem .
SUSTAINABLE CITIES AND SOCIETY, 2022, 82
[5]   Experimental, analytical, and numerical investigation into the feasibility of integrating a passive Trombe wall into a single room [J].
Abdeen, Ahmed ;
Serageldin, Ahmed A. ;
Ibrahim, Mona G. E. ;
El-Zafarany, Abbas ;
Ookawara, Shinichi ;
Murata, Ryo .
APPLIED THERMAL ENGINEERING, 2019, 154 :751-768
[6]   Optimal location of electric vehicle charging station and its impact on distribution network: A review [J].
Ahmad, Fareed ;
Iqbal, Atif ;
Ashraf, Imtiaz ;
Marzband, Mousa ;
Khan, Irfan .
ENERGY REPORTS, 2022, 8 :2314-2333
[7]   Enhancement of the performance of Photovoltaic/Trombe wall system using the porous medium: Experimental and theoretical study [J].
Ahmed, Omer K. ;
Hamad, Khalaf I. ;
Salih, Abdulrazzaq M. .
ENERGY, 2019, 171 :14-26
[8]   Installation of rectangular enclosures filled with phase change nanomaterials on the thrombus walls of a residential building to manage solar radiation in different seasons of the year [J].
Alharbi, Khalid Abdulkhaliq M. ;
Aldosari, Obaid ;
Sina, Nima ;
Aybar, Hikmet S. ;
Fuxi, Shi ;
Alkhatib, Samah Elsayed ;
Mousa, Abd Allah A. .
JOURNAL OF BUILDING ENGINEERING, 2022, 57
[9]  
[Anonymous], 2024, DesignBuilder Simulation Documentation
[10]  
ASHRAE, 2013, 552013 ANSIASHRAE