Investigation of Mechanical and Corrosion Behavior of ECAP Processed AA7075 Through ML, ANNW, RSM, and SA Methodologies

被引:0
作者
Alinizzi, Majed [1 ]
El-Garaihy, W. H. [2 ]
Alateyah, A. I. [2 ]
El-Sanabary, Samar [3 ]
Alsunaydih, Fahad Nasser [4 ]
Alturki, Mansour [1 ]
Abd El-Hafez, H. [2 ]
El-Asfoury, Mohamed S. [3 ]
Zayed, Eman M. [5 ]
Kouta, Hanan [3 ]
机构
[1] Qassim Univ, Coll Engn, Dept Civil Engn, Buraydah, Saudi Arabia
[2] Qassim Univ, Coll Engn, Dept Mech Engn, Buraydah, Saudi Arabia
[3] Port Said Univ, Fac Engn, Prod Engn & Mech Design Dept, Port Said, Egypt
[4] Qassim Univ, Coll Engn, Dept Elect Engn, Buraydah, Saudi Arabia
[5] British Univ Egypt BUE, Fac Engn, Mech Engn Dept, Cairo, Egypt
关键词
AA7075; corrosion; machine learning; mechanical properties; microstructure; optimization; response surface methodology; SEVERE PLASTIC-DEFORMATION; MICROSTRUCTURE EVOLUTION; NEAREST NEIGHBORS; ALUMINUM; ALLOY; OPTIMIZATION; DESIGN;
D O I
10.1002/eng2.70151
中图分类号
TP39 [计算机的应用];
学科分类号
081203 ; 0835 ;
摘要
This study employs a multi-perspective modeling approach combining Response Surface Methodology (RSM), Machine Learning (ML), Artificial Neural Networks (ANNW), and Simulated Annealing (SA) to optimize Equal Channel Angular Pressing (ECAP) parameters for improving the mechanical and corrosion properties of AA7075 alloy. The investigation examines microstructural evolution, mechanical, and corrosion behavior under varying die angles (90 degrees and 120 degrees), processing routes (A, Bc, C), and up to four passes. Significant grain refinement was achieved, with the average grain size reduced from 16.3 to 1.68 mu m for route Bc after four passes at 90 degrees. Hardness nearly doubled from 92 to 177 HV under the same conditions, with routes A and C reaching 169 and 156 HV, respectively. Tensile strength increased from 283 to 352 MPa for 4Bc at 90 degrees, while 120 degrees conditions showed slightly lower but still improved performance. Corrosion analysis revealed route-dependent behaviors, with route Bc at 90 degrees reducing the corrosion rate to 0.0298 mm/year, compared to 0.0345 mm/year for the as-received alloy. ML-based models achieved high predictive accuracy (R2 near unity), and RSM-SA optimization closely matched experimental results. This integrated framework provides actionable insights for tailoring ECAP parameters to enhance AA7075's properties for industrial and construction applications.
引用
收藏
页数:27
相关论文
empty
未找到相关数据