Influence of Alkaline Treatment and Fiber Morphology on the Mechanical, Physical, and Thermal Properties of Polypropylene and Polylactic Acid Biocomposites Reinforced with Kenaf, Bagasse, Hemp Fibers and Softwood

This novel study explores a comprehensive approach, combining fiber and matrix structure-property relationships. By integrating alkali treatment, fiber mapping, and intrinsic fiber properties, this work offers a unique perspective on the mechanical, physical, and thermal properties of biodegradable composites of reinforced polypropylene (PP) and plasticized poly (lactic acid) (PLA), with 25 wt% Kenaf (KBF), Bagasse, Hemp fibers and softwood fibers serving as a control. To enhance fiber-matrix interaction, fibers underwent alkaline treatment using 5% sodium hydroxide (NaOH) for one hour. The mechanical properties, including tensile strength, Young's modulus, and impact strength, were evaluated alongside physical and thermal properties such as fiber mapping, brightness, heat deflection temperature (HDT), melting temperature, melt flow ratio (MFR), and melt flow index (MFI). Scanning electron microscopy (SEM) was used to assess the biocomposites' morphology. The results showed that fiber reinforcement improved the tensile and impact strength of PP composites, particularly for treated Bagasse (6.6% and 22%) and Hemp (7% and 44.7%), while Kenaf exhibited minimal change, indicating its inherently high strength. A slight increase in tensile strength and Young's modulus was observed in all PLA-based composites. The addition of 25% fiber enhanced the thermal properties of both treated and untreated fiber-reinforced composites. Among PP composites, those reinforced with treated fibers exhibited the highest HDT, with Kenaf achieving the best performance (124 degrees C), followed by Bagasse (93 degrees C). The HDT values for untreated fibers were 119 degrees C for KBF, 100 degrees C for softwood, 86 degrees C for Bagasse, and 79 degrees C for Hemp. PLA composites showed a slight increase in HDT with fiber reinforcement. Differential Scanning Calorimetry (DSC) revealed a slight decrease in melting temperature for PP composites and a slight increase for PLA composites. Fiber mapping analysis indicated that Kenaf had the highest aspect ratio, contributing to superior mechanical performance, while Hemp had the lowest aspect ratio and exhibited weaker mechanical properties. Overall, Kenaf and Bagasse fibers demonstrated superior mechanical and thermal properties, comparable to those of softwood fibers, whereas Hemp exhibited moderate performance. The variations in composites behavior were attributed to differences in fiber mapping, alkaline treatment, and the intrinsic properties of both the polymer matrices and the reinforcing fibers. These findings highlight the potential of treated natural fibers, particularly Kenaf and Bagasse, in enhancing the mechanical and thermal properties of biodegradable composites, reinforcing their suitability for sustainable material applications.