NUMERICAL STUDY OF AN AXIAL PISTON PUMP :PREDICTION METHOD OF FLOW RIPPLE BASED ON DIGITAL TWIN

被引:0
作者
Dong, Chang [1 ,2 ]
Tao, Jianfeng [1 ,2 ]
Sun, Hao [1 ,2 ]
机构
[1] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai, Peoples R China
[2] Shanghai Jiao Tong Univ, State Key Lab Mech Syst & Vibrat, Shanghai, Peoples R China
来源
PROCEEDINGS OF BATH/ASME 2024 SYMPOSIUM ON FLUID POWER AND MOTION CONTROL, FPMC2024 | 2024年
关键词
Axial piston pump; digital twin; flow ripple; computational fluid dynamics(CFD);
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The flow and pressure ripple is generated by positive displacement pumps in the hydraulic circuit. Indirectly measuring flow ripple is complicated and impractical due to the complexity of the pipeline in practical systems and modeling uncertainty in model-based prediction methods. To address this problem, our research introduces an innovative approach utilizing digital twin technology for accurately predicting the flow ripple in axial piston pumps. The proposed method reduces modeling uncertainty by only including the pump model and a small part of the pipeline to the pressure sensor as the digital twin model. The measured pressure ripple signal from the pressure sensor is used as the boundary condition for the digital twin model. The effectiveness of this method is verified through numerical experiment. In these, we can easily obtained real flow ripple signals, demonstrating the practical applicability of our approach. The results are promising; with minimal modeling errors and no phase deviation, the predicted flow ripple closely aligns with the actual flow ripple observed in the experiments. This high degree of accuracy underscores the potential of our method in real-world applications. Furthermore, two soft solutions without an angle encoder installed at the shaft are proposed to find the phase-matching digital twin model.
引用
收藏
页数:7
相关论文
共 21 条
  • [1] [Anonymous], 2013, ANSYS FLUENT THEOR G
  • [2] A flowmeter for unsteady liquid flow measurements
    Beaulieu, A.
    Foucault, E.
    Braud, P.
    Micheau, P.
    Szeger, P.
    [J]. FLOW MEASUREMENT AND INSTRUMENTATION, 2011, 22 (02) : 131 - 137
  • [3] Bramley C, 2017, PR ASME SYMP FLUID
  • [4] Development and assessment of a new operating principle for the measurement of unsteady flow rates in high-pressure pipelines
    Catania, A. E.
    Ferrari, A.
    [J]. FLOW MEASUREMENT AND INSTRUMENTATION, 2009, 20 (06) : 230 - 240
  • [5] Cavitation in a high-speed aviation axial piston pump over a wide range of fluid temperatures
    Chao, Qun
    Xu, Zi
    Tao, Jianfeng
    Liu, Chengliang
    Zhai, Jiang
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2022, 236 (04) : 727 - 737
  • [6] Three-dimensional model of an external gear pump with an experimental evaluation of the flow ripple
    Corvaglia, Alessandro
    Ferrari, Alessandro
    Rundo, Massimo
    Vento, Oscar
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2021, 235 (06) : 1097 - 1105
  • [7] Ding H., 2011, ASME, V133
  • [8] Inverse transient analysis based calibration of surrogate pipeline model for fault simulation of axial
    Dong, Chang
    Tao, Jianfeng
    Sun, Hao
    Chao, Qun
    Liu, Chengliang
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2023, 205
  • [9] Subsequence Time Series Clustering-Based Unsupervised Approach for Anomaly Detection of Axial Piston Pumps
    Dong, Chang
    Tao, Jianfeng
    Chao, Qun
    Yu, Honggan
    Liu, Chengliang
    [J]. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2023, 72
  • [10] THE SECONDARY SOURCE METHOD FOR THE MEASUREMENT OF PUMP PRESSURE RIPPLE CHARACTERISTICS .1. DESCRIPTION OF METHOD
    EDGE, KA
    JOHNSTON, DN
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 1990, 204 (01) : 33 - 40