Boron Oxide on the Surface of Grains from Superhard Materials as a Possible Factor Increasing the Performance Characteristics of Grinding Tools

被引：0

作者：

Lavrinenko, V. I. ^{[1
]}

机构：

[1] Natl Acad Sci Ukraine, Bakul Inst Superhard Mat, UA-04074 Kyiv, Ukraine

来源：

JOURNAL OF SUPERHARD MATERIALS | 2024年 / 46卷 / 05期

基金：

英国科研创新办公室;

关键词：

boron oxide; aluminum oxide; cubic boron nitride grains; diamond grains; grinding tools; performance characteristics; OXIDATION RESISTANCE; DIAMOND; COATINGS;

D O I：

10.3103/S1063457624050058

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of boron oxide on the surface of grains from superhard materials on the performance characteristics of grinding tools is studied. The possibility of increasing the strength of cubic boron nitride (cBN) grains by their thermal treatment in air at a low temperature due to the filling of their defective space with a B2O3 film is shown. The results of tests show that the wheel containing cBN powder have higher wear resistance and lower specific grinding energy. It is demonstrated that just boron oxide on the surface of grains from superhard materials is an important factor of increasing their performance characteristics in grinding tools.

引用

页码：402 / 408

页数：7

共 16 条

[1] Enhancing the oxidation resistance of diamond powder by the application of Al2O3 conformal coat by atomic layer deposition [J].

Dominguez, D. ;

Tiznado, H. ;

Borbon-Nunez, H. A. ;

Munoz-Munoz, F. ;

Romo-Herrera, J. M. ;

Soto, G. .

[2] Boron-doped diamond with improved oxidation resistance [J].

Herrmann, M. ;

Matthey, B. ;

Gestrich, T. .

[3]

Kislyi P.S., 1988, Boron Carbide

[4]

KOSTETSKII BI, 1968, DOKL AKAD NAUK SSSR+, V181, P331

[5] Performance Indicators of Grinding Tools with Cubic Boron Nitride Grains with Combined Wear-Resistant Coatings [J].

Lavrinenko, V. I. ;

Poltoratskyi, V. G. ;

Pasichnyi, O. O. ;

Solod, V. Yu. .

JOURNAL OF SUPERHARD MATERIALS, 2024, 46 (04) :322-326

[6] Using Diamond Grinding Powders with Combined Coatings on Diamond Grain Surfaces in Abrasive Tools [J].

Lavrinenko, V. I. ;

Poltoratskyi, V. G. ;

Pasichnyi, O. O. ;

Solod, V. Yu. .

JOURNAL OF SUPERHARD MATERIALS, 2024, 46 (03) :238-243

[7] IMPROVING THE PERFORMANCE OF DIAMOND GRINDING TOOL BY MODIFYING THE SYNTHETIC DIAMOND SURFACES [J].

Lavrinenko, V., I ;

Bochechka, O. O. ;

Poltoratskyi, V. G. ;

Smokvyna, V. V. ;

Solod, V. Yu .

SCIENCE AND INNOVATION, 2024, 20 (01) :3-14

[8] On the Analysis of the Estimate of Energy Expenditures in the Diamond Abrasive Treatment by Wheels from Superhard Materials [J].

Lavrinenko, V. I. .

JOURNAL OF SUPERHARD MATERIALS, 2022, 44 (04) :285-291

[9] Determination of Oxides Intended for the Surface Modification of Diamond Grains by their Functional Characteristics [J].

Lavrinenko, V. I. ;

Solod, V. Yu. ;

Kashynskyi, I. S. ;

Dobroskok, V. L. .

JOURNAL OF SUPERHARD MATERIALS, 2020, 42 (06) :417-422

[10] Oxidation or oxide materials in the machining zone in superabrasive grinding-A factor of influence on the grinding performance [J].

Lavrinenko, V. I. ;

Solod, V. Yu. .

JOURNAL OF SUPERHARD MATERIALS, 2016, 38 (06) :417-422

← 1 2 →