Investigation on laser cladding of Co-Ni coating on copper tube surface using a novel side-axis simultaneous powder feeding method

被引：1

作者：

Cheng, Peng ^{[1
,2
]}

Li, Guangshi ^{[1
,2
]}

Gao, Tianle ^{[1
,2
]}

Wang, Chali ^{[1
,2
]}

Zhao, Pengfei ^{[1
,2
]}

Pang, Zhongya ^{[1
,2
]}

Fu, Yongkang ^{[1
,2
]}

Yu, Xing ^{[1
,2
]}

Zou, Xingli ^{[1
,2
]}

Lu, Xionggang ^{[1
,2
,3
]}

机构：

[1] Shanghai Univ, Sch Mat Sci & Engn, 99 Shangda Rd, Shanghai 200444, Peoples R China

[2] Shanghai Univ, State Key Lab Adv Special Steel, 99 Shangda Rd, Shanghai 200444, Peoples R China

[3] Shanghai Dianji Univ, Sch Mat Sci, 300 Shuihua Rd, Shanghai 201306, Peoples R China

来源：

MATERIALS LETTERS | 2025年 / 384卷

基金：

中国国家自然科学基金;

关键词：

Simultaneous powder feeding; Side-axis layup; Laser cladding; Copper; Microstructure; High temperature wear resistance;

D O I：

10.1016/j.matlet.2025.138078

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

To overcome the high reflectivity of copper and improve the powder utilization, a simultaneous powder feeding method with side-axis layup was developed and successfully laser cladded Co-Ni coating on copper tube surface. The novel powder feeding method effectively suppresses the high reflectivity of the copper surface and increases the powder utilization rate to more than 95 %. The coating is dense, crack-free and has good metallurgical bonding. It has an average microhardness of 362 HV0.1, more than 5 times that of the copper substrate. The coating shows optimal high temperature wear resistance at 500 degrees C.

引用

页数：5

共 4 条

[1] Preparation of a novel Ni/Co-based alloy gradient coating on surface of the crystallizer copper alloy by laser
Chen, Suiyuan
Liang, Jing
Liu, Changsheng
Sun, Kai
Mazumder, Jyoti
APPLIED SURFACE SCIENCE, 2011, 258 (04) : 1443 - 1450
[2] Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel
Shi, Yan
Li, Yunfeng
Liu, Jia
Yuan, Zhenyu
OPTICS AND LASER TECHNOLOGY, 2018, 99 : 256 - 270
[3] Development and characterization of Ni60 alloy and SiC ceramic reinforced metal matrix composite coating on Ti-6Al-4V using laser cladding with coaxial powder feeding system
Huan Wang
Ki-Hoon Shin
Hong Seok Kim
The International Journal of Advanced Manufacturing Technology, 2023, 128 : 2705 - 2718
[4] Development and characterization of Ni60 alloy and SiC ceramic reinforced metal matrix composite coating on Ti-6Al-4V using laser cladding with coaxial powder feeding system
Wang, Huan
Shin, Ki-Hoon
Kim, Hong Seok
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 128 (5-6) : 2705 - 2718

← 1 →