Study on the effect of selective condensation on the distribution of co-pyrolysis products from cotton straw and polyethylene

被引:0
|
作者
Ma, Yakai [1 ]
Huang, Yitao [1 ]
Yang, Yaojun [1 ]
Zhu, Xifeng [1 ]
机构
[1] Univ Sci & Technol China, Dept Thermal Sci & Energy Engn, Hefei 230026, Anhui, Peoples R China
关键词
Cotton straw; Polyethylene; Co-pyrolysis; Condensation; Phenolic enrichment; HIGH-DENSITY POLYETHYLENE; THERMAL-DECOMPOSITION; TG-FTIR; BIO-OIL; BIOMASS; CELLULOSE; BLENDS; MECHANISM;
D O I
10.1016/j.energy.2025.134907
中图分类号
O414.1 [热力学];
学科分类号
摘要
This study investigated the co-pyrolysis of CT with PE at different weight ratios (1:0, 1:2, 1:1, 2:1, 0:1) using This study investigated the co-pyrolysis of CT with PE at different weight ratios (1:0, 1:2, 1:1, 2:1, 0:1) using thermogravimetric analysis, pyrolysis-gas chromatography/mass spectrometry, and a vertical fixed fluidized bed. thermogravimetric analysis, pyrolysis-gas chromatography/mass spectrometry, and a vertical fixed fluidized bed. The physical intervention of different condensation temperatures on pyrolysis vapors was examined using seThe physical intervention of different condensation temperatures on pyrolysis vapors was examined using selective condensation technology, which aimed to improve the refined condensation and enrichment of highlective condensation technology, which aimed to improve the refined condensation and enrichment of highvalue-added products. The results showed that the co-pyrolysis changed the rate of weight loss of the blend. value-added products. The results showed that the co-pyrolysis changed the rate of weight loss of the blend. In the active pyrolysis stage, the maximum weight loss rate of 0.89 %/degrees C for CT2PE1 was greater than the In the active pyrolysis stage, the maximum weight loss rate of 0.89 %/degrees C for CT2PE1 was greater than the maximum weight loss rate of 0.62 %/degrees C for CT. The co-pyrolysis of CT and PE led to cyclization and aromatimaximum weight loss rate of 0.62 %/degrees C for CT. The co-pyrolysis of CT and PE led to cyclization and aromatization, allowing the hydrocarbons to undergo a series of reactions to increase the relative content of phenols. zation, allowing the hydrocarbons to undergo a series of reactions to increase the relative content of phenols. CT2PE1 had the highest relative phenolic content of 37.74 %. In addition, the high temperature of 343 K CT2PE1 had the highest relative phenolic content of 37.74 %. In addition, the high temperature of 343 K condensed the highest content of phenolic compounds in CT2PE1, which was 4.50 %.The coupling effect of cocondensed the highest content of phenolic compounds in CT2PE1, which was 4.50 %.The coupling effect of copyrolysis technology and selective condensation technology increased the recovery rate of detectable phenolic pyrolysis technology and selective condensation technology increased the recovery rate of detectable phenolic compounds by 163.16 %. This effectively improved the enrichment of high value-added phenolic compounds in compounds by 163.16 %. This effectively improved the enrichment of high value-added phenolic compounds in bio-oil, and provided an effective technical route for bio-oil purification and quality improvement. bio-oil, and provided an effective technical route for bio-oil purification and quality improvement.
引用
收藏
页数:11
相关论文
共 50 条
  • [1] Understanding the synergistic mechanisms of co-pyrolysis of straw and polyethylene for high-quality pyrolysis oil
    He, Zhen
    Lv, Quanwei
    Jiang, Xia
    Su, Yang
    Cao, Guangmei
    Zhang, Xianggang
    Xie, Lingling
    Wu, Haijun
    RENEWABLE ENERGY, 2025, 246
  • [2] Thermogravimetric Analysis of the Effects of Transition Metals on the Co-pyrolysis of Rice Straw and Polyethylene
    Liu, Guofu
    Wang, Zhanghong
    Shen, Dekui
    Wu, Chunfei
    Gu, Sai
    BIORESOURCES, 2019, 14 (04): : 9033 - 9053
  • [3] Pyrolysis behaviour and synergistic effect in co-pyrolysis of wheat straw and polyethylene terephthalate: A study on product distribution and oil characterization
    Kumar, M. Anis
    Swarnalatha, A. P.
    Shwetha, J.
    Dhanalakshmi, C. Sowmya
    Saravanan, P.
    Hatamleh, Ashraf Atef
    Al-Dosary, Munirah Abdullah
    Mani, Ravishankar Ram
    Chung, Woo Jin
    Chang, Soon Woong
    Ravindran, Balasubramani
    HELIYON, 2024, 10 (17)
  • [4] Effect of mixing methods of polyethylene and cellulose on volatile products from its co-pyrolysis
    Sophonrat, Nanta
    Yang, Weihong
    PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON APPLIED ENERGY, 2017, 142 : 315 - 320
  • [5] Co-pyrolysis of pretreated cotton stalk and low-density polyethylene: Evolved products and pyrolysis mechanism analysis
    Wang, Xingxiang
    Dai, Yiwen
    Zhang, Aolong
    Wang, Yin
    Liu, Jichang
    Li, Jiangbing
    JOURNAL OF THE ENERGY INSTITUTE, 2024, 117
  • [6] Co-pyrolysis and co-gasification of biomass and polyethylene: Thermal behaviors, volatile products and characteristics of their residues
    Fan, Honggang
    Gu, Jing
    Hu, Shuangqing
    Yuan, Haoran
    Chen, Yong
    JOURNAL OF THE ENERGY INSTITUTE, 2019, 92 (06) : 1926 - 1935
  • [7] Co-pyrolysis coupled with torrefaction enhances hydrocarbons production from rice straw and oil sludge: The effect of torrefaction on co-pyrolysis synergistic behaviors
    Xu, Hao
    Cheng, Shuo
    Hungwe, Douglas
    Yoshikawa, Kunio
    Takahashi, Fumitake
    APPLIED ENERGY, 2022, 327
  • [8] A study on the effect of heating rate during cellulose and polyethylene co-pyrolysis
    Liu B.
    Guo X.
    Wu B.
    Liu Z.-M.
    Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, 2023, 51 (07): : 930 - 938
  • [9] ReaxFF simulations of the synergistic effect mechanisms during co-pyrolysis of coal and polyethylene/polystyrene
    Hong, Dikun
    Li, Ping
    Si, Ting
    Guo, Xin
    ENERGY, 2021, 218
  • [10] Co-Pyrolysis Behaviors of the Cotton Straw/PP Mixtures and Catalysis Hydrodeoxygenation of Co-Pyrolysis Products over Ni-Mo/Al2O3 Catalyst
    Hua, Derun
    Wu, Yulong
    Chen, Yu
    Li, Jian
    Yang, Mingde
    Lu, Xinning
    CATALYSTS, 2015, 5 (04) : 2085 - 2097