Multi-objective optimization of switched reluctance motor driving electric vehicles based on vehicle operating condition

被引:0
作者
Zhu, Yueying [1 ,2 ]
Wei, Weiyan [1 ]
Wang, Jiaying [1 ]
Xing, Chao [1 ]
机构
[1] Tianjin Univ Sci & Technol, Coll Mech Engn, 1038 Dagu Nan Rd, Tianjin 300222, Peoples R China
[2] Tianjin Univ Sci & Technol, Tianjin Key Lab Integrated Design & Online Monitor, Tianjin, Peoples R China
基金
中国国家自然科学基金;
关键词
Electric vehicles; switched reluctance motor; optimization; time-varying operating condition; DESIGN; MACHINE; TORQUE;
D O I
10.1177/09544070241290073
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
To improve the comprehensive performance of the switched reluctance motor (SRM) for electric vehicles (EVs) under actual driving conditions, a novel geometrical optimization method based on the time-varying phase current characteristics and the comprehensive indicator with justified weight coefficients is proposed in this paper. First, based on the established dynamic models of EV and SRM, the actual operating phase currents of the motor working under the New European Driving Cycle (NEDC) are extracted and classified to develop the representative optimization conditions. Then, considering the requirements of EV, five indicators are defined to evaluate the comprehensive performance of SRM, and a new multi-objective synchronization optimization function is proposed with five weight coefficients obtained by the statistical analysis method for the sample data of the indicators. Furthermore, the geometrical optimization for a four-phase 8/6 SRM is carried out by the combination of Particle Swarm Optimization (PSO) and BP neural network algorithms, after analyzing the effects of key geometrical parameters on the indicators. Finally, the work performance of the optimized SRM is evaluated and compared with that of the initial prototype, and the results show that the optimized SRM with the proposed multi-objective synchronization optimization method can improve the comprehensive indicator by 59.59%, and can significantly enhance the vehicle actual working economy by 50.74% under NEDC cycle.
引用
收藏
页数:15
相关论文
共 29 条
[1]   Simultaneous Optimization of Geometry and Firing Angles for In-Wheel Switched Reluctance Motor Drive [J].
Anvari, Bahareh ;
Toliyat, Hamid A. ;
Fahimi, Babak .
IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION, 2018, 4 (01) :322-329
[2]   Evolutionary computation based multi-objective pole shape optimization of switched reluctance machine [J].
Balaji, M. ;
Kamaraj, V. .
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS, 2012, 43 (01) :63-69
[3]   Geometrical optimization of SRM on operating mode for automotive application [J].
Belhadi, M'Hamed ;
Krebs, Guillaume ;
Marchand, Claude ;
Hannoun, Hala ;
Mininger, Xavier .
ELECTRICAL ENGINEERING, 2018, 100 (01) :303-310
[4]   Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview [J].
Boldea, Ion ;
Tutelea, Lucian N. ;
Parsa, Leila ;
Dorrell, David .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (10) :5696-5711
[5]   Computationally Efficient Optimization of a Five-Phase Flux-Switching PM Machine Under Different Operating Conditions [J].
Chen, Hao ;
Liu, Xiangdong ;
Demerdash, Nabeel A. O. ;
EL-Refaie, Ayman M. ;
Chen, Zhen ;
He, Jiangbiao .
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2019, 68 (07) :6495-6508
[6]   Multiobjective Optimization Design of a Switched Reluctance Motor for Low-Speed Electric Vehicles With a Taguchi-CSO Algorithm [J].
Chen, Hao ;
Yan, Wenju ;
Gu, Jason J. ;
Sun, Meng .
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2018, 23 (04) :1762-1774
[7]   A Novel Structure of Switched Reluctance Machine With Higher Mean Torque and Lower Torque Ripple [J].
Davarpanah, Gholamreza ;
Faiz, Jawad .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2020, 35 (04) :1859-1867
[8]   A New Rotor Shape Design of 6/2 Switched Reluctance Motor: Comparative Analysis of its Chaotic Behavior with Other Structures [J].
Guidkaya, Golam ;
Fankem, Eric Duckler Kenmoe ;
Effa, Joseph Yves .
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, 2021, 16 (01) :309-320
[9]   Noise reduction in switched reluctance motor by modifying the structuresInspec keywordsOther keywords [J].
Hosseini, Simin ;
Alinejad-Beromi, Yousef .
IET ELECTRIC POWER APPLICATIONS, 2020, 14 (14) :2863-2872
[10]   Comparative Study of Switched Reluctance Machines With Half- and Full-Teeth-Wound Windings [J].
Hua, Wei ;
Hua, Hao ;
Dai, Ningyi ;
Zhao, Guishu ;
Cheng, Ming .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2016, 63 (03) :1414-1424