Experimental study on milling mechanism and surface quality of Mg2Si/Al composites

被引：0
作者：
Lv, Guangchao [1 ]
Gao, Qi [1 ]
Wang, Quanzhao [2 ]
机构：
[1] Liaoning Univ Technol, Sch Mech Engn & Automat, Jinzhou 121001, Peoples R China
[2] Chinese Acad Sci, Inst Met Res, Shangyang, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2025年
关键词：
Mg2Si/Al composites; milling mechanism; finite element simulation; surface quality; parameter optimization; SICP/AL COMPOSITES; CUTTING MECHANISM; SIMULATION; MICRO;
D O I：
10.1177/02670836241310761
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Mg2Si/Al composites are widely used in aerospace and automotive lightweight applications due to their excellent structural properties, such as superior specific stiffness, specific strength, and wear resistance. The removal mechanism of Mg2Si/Al composites is explored by establishing a finite element milling simulation model. A three-factor, four-level milling experiment based on the orthogonal experimental method is conducted to illustrate the patterns of the effects of milling parameters and surface defects on surface quality. Suitable milling parameters are successfully optimized by predictive modeling and experimental validation methods. The results show that the removal of Mg2Si/Al composites is mainly characterized by plastic deformation of the aluminum matrix and brittle fracture, crushing, bulging, and pulling out of Mg2Si particles.
引用
收藏
页数：15
相关论文
共 40 条
  • [21] Surface defects formation mechanism of Mg2Si/Al composites by micro cutting
    Ning, Peixing
    Zhao, Ji
    Ji, Shijun
    Li, Jingjin
    Dai, Handa
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2024, 88 : 324 - 340
  • [22] Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting
    LU, Shijin
    ZHANG, Junjie
    LI, Zengqiang
    ZHANG, Jianguo
    WANG, Xiaohui
    HARTMAIER, Alexander
    XU, Jianfeng
    YAN, Yongda
    SUN, Tao
    [J]. CHINESE JOURNAL OF AERONAUTICS, 2021, 34 (04) : 241 - 252
  • [23] Effect of beryllium addition and heat treatment on the microstructure and mechanical properties of the 15%Mg2Si/Al-8Si composite
    Tang, Peng
    Yu, Fengyang
    Teng, Xiaodan
    Peng, Linxin
    Wang, Kang
    [J]. MATERIALS CHARACTERIZATION, 2021, 180
  • [24] Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites
    Teng, Xiangyu
    Chen, Wanqun
    Huo, Dehong
    Shyha, Islam
    Lin, Chao
    [J]. COMPOSITE STRUCTURES, 2018, 203 : 636 - 647
  • [25] Force Prediction and Material Removal Mechanism Analysis of Milling SiCp/2009Al
    Wang, Rong
    Zhao, Man
    Mao, Jian
    Liang, Steven Y.
    [J]. MICROMACHINES, 2022, 13 (10)
  • [26] Simulation and experimental investigation on the cutting mechanism and surface generation in machining SiCp/Al MMCs
    Wang, Yefu
    Liao, Wenhe
    Yang, Kai
    Teng, Xiangyu
    Chen, Wanqun
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 100 (5-8) : 1393 - 1404
  • [27] Effect of Aluminum Content on Microstructure and Mechanical Properties of High-Entropy AlxCoCuNiTi Alloys
    Wang, Z.
    Zhou, J.
    Ma, M.
    Zhao, L.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2021, 63 (5-6) : 297 - 303
  • [28] Characterization, quantitative evaluation, and formation mechanism of surface damage in ultrasonic vibration assisted scratching of Cf/ SiC composites
    Wang, Zhongwang
    Bao, Yan
    Feng, Kun
    Li, Baorong
    Dong, Zhigang
    Kang, Renke
    Wang, Yidan
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2024, 44 (07) : 4502 - 4523
  • [29] Wu F., 2023, Mod Manuf Eng, V05, P91
  • [30] Significant Microstructure Refinement and Improved Mechanical Properties of Mg2Si/Al Composites Induced by Nanoscale TiB2 Particles
    Xiao, Peng
    Zhao, Qiqiang
    Wu, Wenyu
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (09): : 3463 - 3477
1234