Experimental study on milling mechanism and surface quality of Mg2Si/Al composites

被引：0
作者：
Lv, Guangchao [1 ]
Gao, Qi [1 ]
Wang, Quanzhao [2 ]
机构：
[1] Liaoning Univ Technol, Sch Mech Engn & Automat, Jinzhou 121001, Peoples R China
[2] Chinese Acad Sci, Inst Met Res, Shangyang, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2025年
关键词：
Mg2Si/Al composites; milling mechanism; finite element simulation; surface quality; parameter optimization; SICP/AL COMPOSITES; CUTTING MECHANISM; SIMULATION; MICRO;
D O I：
10.1177/02670836241310761
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Mg2Si/Al composites are widely used in aerospace and automotive lightweight applications due to their excellent structural properties, such as superior specific stiffness, specific strength, and wear resistance. The removal mechanism of Mg2Si/Al composites is explored by establishing a finite element milling simulation model. A three-factor, four-level milling experiment based on the orthogonal experimental method is conducted to illustrate the patterns of the effects of milling parameters and surface defects on surface quality. Suitable milling parameters are successfully optimized by predictive modeling and experimental validation methods. The results show that the removal of Mg2Si/Al composites is mainly characterized by plastic deformation of the aluminum matrix and brittle fracture, crushing, bulging, and pulling out of Mg2Si particles.
引用
收藏
页数：15
相关论文
共 40 条
  • [1] Microstructural evolution and hardness property of in situ Al-Mg2Si composites using one-step gravity casting method
    Biswas, Prosanta
    Mondal, Manas Kumar
    Roy, Himadri
    Mandal, Durbadal
    [J]. CANADIAN METALLURGICAL QUARTERLY, 2017, 56 (03) : 340 - 348
  • [2] An analytical micro-milling force model based on the specific cutting pressure-feed dependence, in presence of ploughing and tool run-out effects
    Cappellini, Cristian
    Abeni, Andrea
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2024, 116 : 224 - 245
  • [3] Research on Parameter Optimization of Micro-Milling Al7075 Based on Edge-Size-Effect
    Chen, Yinghua
    Wang, Tao
    Zhang, Guoqing
    [J]. MICROMACHINES, 2020, 11 (02)
  • [4] Study on the cutting mechanism of SiCp/Al considering particle size and distribution
    Chen, Yufeng
    Zhang, Xu
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 115 (04) : 1211 - 1225
  • [5] Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites
    Cui, Youzheng
    Gao, Shenrou
    Wang, Fengjuan
    Hu, Qingming
    Xu, Cheng
    Xu, Fengxia
    [J]. MATERIALS, 2021, 14 (15)
  • [6] The Research of Effect of Cutting Parameters on Machined Surface Defects in High-Speed Milling of SiCp/Al Composites
    Dong, Guojun
    Zhang, Yuanjing
    Zhou, Ming
    Wang, Yangjun
    [J]. ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII, 2014, 589-590 : 245 - +
  • [7] Particle Removal Mechanism of High Volume Fraction SiCp/Al Composites by Single Diamond Grit Tool
    Du, Jinguang
    Ming, Wuyi
    Cao, Yang
    Ma, Jun
    He, Wenbin
    Li, Xiaoke
    [J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2019, 34 (02): : 324 - 331
  • [8] Dynamic behavior description and three-dimensional cutting simulation of SiCp/Al composites with high volume fraction
    Fan, Yihang
    Xu, Yongshuo
    Hao, Zhaopeng
    Lin, Jieqiong
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2022, 77 : 174 - 189
  • [9] Surface integrity and material removal mechanisms in high-speed grinding of Al/SiCp metal matrix composites
    Guo, Sai
    Lu, Shouxiang
    Zhang, Bi
    Cheung, Chi Fai
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2022, 178
  • [10] Micro-milling mechanism and surface roughness of high volume fraction SiCp/Al composites
    Jin, Po
    Gao, Qi
    Wang, Quanzhao
    Li, Wenbo
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 115 (1-2) : 91 - 104
1234