Numerical Modeling of Connections with Screws in Cross-Laminated Timber

被引：0
作者：
Sejkot, Petr [1 ]
Iqbal, Asif [2 ]
机构：
[1] Czech Tech Univ, Prague, Czech Republic
[2] Univ Northern British Columbia, Prince George, BC, Canada
来源：
PROCEEDINGS OF THE CANADIAN SOCIETY FOR CIVIL ENGINEERING ANNUAL CONFERENCE 2023, VOL 11, CSCE 2023 | 2024年 / 505卷
关键词：
Timber connections; Angle brackets; Screws; Numerical simulation; Full-scale tests; !text type='Python']Python[!/text] scripting; JOINTS;
D O I：
10.1007/978-3-031-61531-3_23
中图分类号：
TP39 [计算机的应用];
学科分类号：
081203 ; 0835 ;
摘要：
Reinforced angle brackets are commonly used as connectors in wood structures. These connectors are typically installed with ring shank nails or screws. This paper presents the experimental results of cross-laminated timber (CLT) connections which consist of reinforced angle brackets and heavy-duty screws. These screws are one of the stiffest and the strongest options for the fasteners which can be used with the reinforced angle brackets. However, this option has not been extensively studied by many scholars yet. Therefore, this paper contains detailed numerical simulations with aim to be able to predict the failure modes and the load-bearing capacities of experimentally tested connections. Benefits together with the limitations of the presented numerical method are discussed.
引用
收藏
页码：287 / 298
页数：12
相关论文
共 10 条
  • [1] Correlation approach for the Push-Out and full-size bending short-term performances of timber-to-timber slabs with Self-Tapping Screws
    Bedon, Chiara
    Sciomenta, Martina
    Fragiacomo, Massimo
    [J]. ENGINEERING STRUCTURES, 2021, 238
  • [2] Mechanical Characterization of Timber-to-Timber Composite (TTC) Joints with Self-Tapping Screws in a Standard Push-Out Setup
    Bedon, Chiara
    Sciomenta, Martina
    Fragiacomo, Massimo
    [J]. APPLIED SCIENCES-BASEL, 2020, 10 (18):
  • [3] Numerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws
    Bedon, Chiara
    Fragiacomo, Massimo
    [J]. COMPOSITE STRUCTURES, 2019, 207 : 13 - 28
  • [4] An innovative shear-tension angle bracket for Cross-Laminated Timber structures: Experimental tests and numerical modelling
    D'Arenzo, Giuseppe
    Rinaldin, Giovanni
    Fossetti, Marinella
    Fragiacomo, Massimo
    [J]. ENGINEERING STRUCTURES, 2019, 197
  • [5] Izzi M, 2016, WORLD C TIMB ENG 201, P1
  • [6] A hysteresis model for timber joints with dowel-type fasteners
    Izzi, Matteo
    Rinaldin, Giovanni
    Polastri, Andrea
    Fragiacomo, Massimo
    [J]. ENGINEERING STRUCTURES, 2018, 157 : 170 - 178
  • [7] Krawinkler H., 2001, DEV TESTING PROTOCOL
  • [8] Seismic behavior of cross-laminated timber panel buildings equipped with traditional and innovative connectors
    Latour, Massimo
    Rizzano, Gianvittorio
    [J]. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2017, 17 (02) : 382 - 399
  • [9] Numerical analysis of in- and out-of-plane coupling effects on angle bracket connections in CLT structures
    Rezvani, Saeed
    Zhou, Lina
    Ni, Chun
    [J]. ENGINEERING STRUCTURES, 2022, 250
  • [10] Sejkot P, 2021, WORLD C TIMBER ENG W, P3026
1