Evaluation of a Metal 3D-Printed Corrugated Conical Horn Antenna for the E-band

被引：0

作者：

Tafertshofer, Markus ^{[1
]}

Binder, Maximilian ^{[1
]}

Biebl, Erwin ^{[1
]}

机构：

[1] Tech Univ Munich, Professorship Microwave Engn, Munich, Germany

来源：

2024 IEEE INTERNATIONAL CONFERENCE ON MICROWAVES, COMMUNICATIONS, ANTENNAS, BIOMEDICAL ENGINEERING AND ELECTRONIC SYSTEMS, COMCAS 2024 | 2024年

关键词：

corrugated horn antenna; additive manufacturing; metal laser sintering;

D O I：

10.1109/COMCAS58210.2024.10666250

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

This document proposes the development, manufacturing, and measurement results of a metal 3D printed corrugated conical horn antenna for the E-band (60 to 90 GHz). After a short introduction to the printing technology, the design process of the antenna is presented. The corrugated design is adapted to be compatible to the additive manufacturing (AM) process. After the printing process, the antenna is investigated in terms of dimensional tolerance and surface roughness. The comparison between simulation and measurement yields good results.

引用

页数：4

共 7 条

[1] 3D MicroPrint, Material Data Sheet 316L Stainless Steel
[2] Balanis C. A., 2016, Antenna Theory: Analysis and Design
[3] Design of corrugated horns: A primer
Granet, C
James, GL
[J]. IEEE ANTENNAS AND PROPAGATION MAGAZINE, 2005, 47 (02) : 76 - 84
[4] The single antenna method for the measurement of antenna gain and phase
Krieger, J. D.
Newman, E. H.
Gupta, I. J.
[J]. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2006, 54 (11) : 3562 - 3565
[5] A 3-D Printed 300 GHz Waveguide Cavity Filter by Micro Laser Sintering
Skaik, Talal
Wang, Yi
Salek, Milan
Hunyor, Peter
Wang, Hui
Huggard, Peter G.
Starke, Thomas
Attallah, Moataz
Martinez, Rafael
[J]. IEEE TRANSACTIONS ON TERAHERTZ SCIENCE AND TECHNOLOGY, 2022, 12 (03) : 274 - 281
[6] Stutzman W.L., 2012, Antenna Theory and Design, V3
[7] Investigation on 3-D-Printing Technologies for Millimeter-Wave and Terahertz Applications
Zhang, Bing
Guo, Yong-Xin
Zirath, Herbert
Zhang, Yue Ping
[J]. PROCEEDINGS OF THE IEEE, 2017, 105 (04) : 723 - 736

← 1 →