Investigation of the impact of supercritical carbon dioxide on the micro-mechanical properties of tight sandstone using nano-indentation experiments

被引:0
|
作者
Li, Zhenglan [1 ]
Luo, Weiyi [1 ]
Peng, Yu [1 ]
Cheng, Leiming [2 ]
Chen, Xi [2 ]
Zhao, Jinzhou [1 ]
Sepehrnoori, Kamy [3 ]
机构
[1] Southwest Petr Univ, State Key Lab Oil & Gas Reservoir Geol & Exploitat, Chengdu 610500, Peoples R China
[2] PetroChina Xinjiang Oilfield Co, Res Inst Oil Prod Technol, Karamay 834000, Xinjiang, Peoples R China
[3] Univ Texas Austin, Dept Petr & Geosyst Engn, Austin, TX 78712 USA
来源
GEOENERGY SCIENCE AND ENGINEERING | 2025年 / 247卷
关键词
Supercritical CO 2; Tight sandstone; Nano-indentation; Micro-mechanical properties; Creep; MECHANICAL-PROPERTIES; CO2; SHALE; MODULUS; WATER;
D O I
10.1016/j.geoen.2025.213678
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
CO2 capture and storage (CCS) technology is currently developing rapidly and is being used to sequester large amounts of CO2 aiming to reduce the greenhouse effect. However, CO2 injected into the ground at high temperatures and pressures can become supercritical and interact with rocks. The mechanical properties of rocks interacting with supercritical CO2 are altered, resulting in CO2 leakage. Therefore, it is necessary to study how the mechanical properties of rocks change after interaction with supercritical CO2. In this paper, tight sandstone is used as an experimental sample to study the mechanical properties of sandstone after interacting with supercritical CO2, through high-temperature and high-pressure soaking experiments and nano-indentation experiments. The effects of supercritical CO2 on the micro-mechanical properties of sandstone under different soaking time, temperature and pressure conditions are analyzed. The experimental results show that the statistical mean values of modulus of elasticity and hardness of sandstone decreased after supercritical CO2 soaking, and the longer the soaking time the more serious the deterioration of mechanical properties of sandstone. Supercritical CO2 is capable of dissolving minerals such as clay and feldspar, but the degree of dissolution varies widely and quartz is minimally affected. The modulus of elasticity of quartz decreased by only 14.7% and hardness by 19.4% after 15 days of soaking, compared to a 41.4% decrease in modulus of elasticity and a 48.7% decrease in hardness for clay. It is worth mentioning that the deterioration of mechanical properties in the clay-enriched area is more serious than that of quartz. The creep behavior of the sandstone was similarly affected by supercritical CO2, with the viscous modulus of the three minerals (clay, feldspar, quartz) leveling off after 15 days of soaking. The viscous modulus was decreased by 50.5%, 53.4%, 67.1% and 73.2% compared to the original samples after soaking for 15 days under four soaking conditions. This paper investigates the mechanism of supercritical CO2 interaction with tight sandstone through a series of experiments, providing theoretical support for CCS and CO2 fracturing.
引用
收藏
页数:14
相关论文
共 50 条
  • [31] Characterization and Evaluation of Micro-mechanical Properties of Ultra High Strength Concrete by using Micro-indentation Test
    Murthy A.R.
    Iyer N.R.
    Raghu Prasad B.K.
    Journal of The Institution of Engineers (India): Series A, 2016, 97 (03) : 231 - 238
  • [32] Characterization of mechanical properties of TaC/Fe composite layer on gray cast iron by using nano-indentation
    Li, Jilin
    Zhao, Nana
    Li, Shujuan
    Xu, Yunhua
    Liu, Heguang
    Shao, Tiantian
    Wang, Xin
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2022, 113 (11) : 962 - 973
  • [33] Comparison of mechanical properties of C-S-H and portlandite between nano-indentation experiments and a modeling approach using various simulation techniques
    Fu, Jia
    Kamali-Bernard, Siham
    Bernard, Fabrice
    Cornen, Marilyn
    COMPOSITES PART B-ENGINEERING, 2018, 151 : 127 - 138
  • [34] Investigation of Surface Micro-Mechanical Properties of Various Asphalt Binders Using AFM
    Hou, Yueqin
    Chen, Yun
    Zou, Haiwei
    Ji, Xiaoping
    Shao, Dongye
    Zhang, Zhengming
    Chen, Ye
    MATERIALS, 2022, 15 (12)
  • [35] Properties of the interfacial transition zone in rubberised concrete-an investigation using nano-indentation and EDS analysis
    Momotaz, H.
    Rahman, M. M.
    Karim, M. R.
    Zhuge, Y.
    Ma, X.
    Levett, P.
    JOURNAL OF BUILDING ENGINEERING, 2023, 77
  • [36] Investigation of mechanical properties of granular γ-alumina using experimental nano indentation and nano scratch tests
    Mojtaba Jahanshahi
    Roozbeh Mofidian
    Seyed Sharafodin Hosseini
    Mehdi Miansari
    SN Applied Sciences, 2023, 5
  • [37] Investigation of mechanical properties of granular γ-alumina using experimental nano indentation and nano scratch tests
    Jahanshahi, Mojtaba
    Mofidian, Roozbeh
    Hosseini, Seyed Sharafodin
    Miansari, Mehdi
    SN APPLIED SCIENCES, 2023, 5 (06):
  • [38] Influence of Hydroxyapatite Nano-particles on the Mechanical and Tribological Properties of Orthopedic Cement-Based Nano-composites Measured by Nano-indentation and Nano-scratch Experiments
    Shirazi, H. Asgharzadeh
    Ayatollahi, M. R.
    Naimi-Jamal, M. R.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (09) : 3300 - 3306
  • [39] Micro-mechanical properties of C–S–H modified by various carbon nanotubes and the correlation with the nano/micro-structures
    Xinfeng Qiao
    Chuanlin Hu
    Shun Yao
    Fazhou Wang
    MRS Communications, 2023, 13 : 268 - 275
  • [40] Study of the Mechanical Properties of NiTi Modified by Carbon Plasma Immersion Ion Implantation Using Nano-Indentation Test and Finite Element Method Simulation
    Shanaghi, A.
    Siyavoshi, A.
    Souri, A. R.
    Shanaghi, Ab
    Chu, P. K.
    PHYSICS OF METALS AND METALLOGRAPHY, 2022, 123 (13): : 1395 - 1401