Investigation of the impact of supercritical carbon dioxide on the micro-mechanical properties of tight sandstone using nano-indentation experiments

被引:0
|
作者
Li, Zhenglan [1 ]
Luo, Weiyi [1 ]
Peng, Yu [1 ]
Cheng, Leiming [2 ]
Chen, Xi [2 ]
Zhao, Jinzhou [1 ]
Sepehrnoori, Kamy [3 ]
机构
[1] Southwest Petr Univ, State Key Lab Oil & Gas Reservoir Geol & Exploitat, Chengdu 610500, Peoples R China
[2] PetroChina Xinjiang Oilfield Co, Res Inst Oil Prod Technol, Karamay 834000, Xinjiang, Peoples R China
[3] Univ Texas Austin, Dept Petr & Geosyst Engn, Austin, TX 78712 USA
来源
GEOENERGY SCIENCE AND ENGINEERING | 2025年 / 247卷
关键词
Supercritical CO 2; Tight sandstone; Nano-indentation; Micro-mechanical properties; Creep; MECHANICAL-PROPERTIES; CO2; SHALE; MODULUS; WATER;
D O I
10.1016/j.geoen.2025.213678
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
CO2 capture and storage (CCS) technology is currently developing rapidly and is being used to sequester large amounts of CO2 aiming to reduce the greenhouse effect. However, CO2 injected into the ground at high temperatures and pressures can become supercritical and interact with rocks. The mechanical properties of rocks interacting with supercritical CO2 are altered, resulting in CO2 leakage. Therefore, it is necessary to study how the mechanical properties of rocks change after interaction with supercritical CO2. In this paper, tight sandstone is used as an experimental sample to study the mechanical properties of sandstone after interacting with supercritical CO2, through high-temperature and high-pressure soaking experiments and nano-indentation experiments. The effects of supercritical CO2 on the micro-mechanical properties of sandstone under different soaking time, temperature and pressure conditions are analyzed. The experimental results show that the statistical mean values of modulus of elasticity and hardness of sandstone decreased after supercritical CO2 soaking, and the longer the soaking time the more serious the deterioration of mechanical properties of sandstone. Supercritical CO2 is capable of dissolving minerals such as clay and feldspar, but the degree of dissolution varies widely and quartz is minimally affected. The modulus of elasticity of quartz decreased by only 14.7% and hardness by 19.4% after 15 days of soaking, compared to a 41.4% decrease in modulus of elasticity and a 48.7% decrease in hardness for clay. It is worth mentioning that the deterioration of mechanical properties in the clay-enriched area is more serious than that of quartz. The creep behavior of the sandstone was similarly affected by supercritical CO2, with the viscous modulus of the three minerals (clay, feldspar, quartz) leveling off after 15 days of soaking. The viscous modulus was decreased by 50.5%, 53.4%, 67.1% and 73.2% compared to the original samples after soaking for 15 days under four soaking conditions. This paper investigates the mechanism of supercritical CO2 interaction with tight sandstone through a series of experiments, providing theoretical support for CCS and CO2 fracturing.
引用
收藏
页数:14
相关论文
共 50 条
  • [21] Development of Nano-Indentation Tester with a Raman Spectroscopy Interface for Mechanical Properties of Micro Scale Materials
    Fujitsuka, M.
    Yamaguchi, M.
    Ueno, S.
    Kouzu, T.
    Miura, I.
    Katayama, S.
    XXII INTERNATIONAL CONFERENCE ON RAMAN SPECTROSCOPY, 2010, 1267 : 572 - +
  • [22] NUMERICAL INVESTIGATION OF THE IDENTIFIABILITY OF ELASTOMER MECHANICAL PROPERTIES BY NANO-INDENTATION AND SHAPE-MANIFOLD APPROACH
    Ezzaamari, Oumaima
    Le Quilliec, Guenhael
    Lacroix, Florian
    Meo, Stephane
    RUBBER CHEMISTRY AND TECHNOLOGY, 2021, 94 (02): : 376 - 392
  • [23] Nano-indentation and micro-compression tests on the measurement of mechanical properties in tribologically transformed surfaces (TTS)
    Tumbajoy-Spinel, D.
    Kermouche, G.
    Descartes, S.
    Bergheau, J. -M.
    Lacaille, V.
    Guillonneau, G.
    Michler, J.
    MATERIAUX & TECHNIQUES, 2015, 103 (03):
  • [24] Impact of Adhesive Application and Moisture on the Mechanical Properties of the Adhesive Interface Determined by the Nano-indentation Technique
    Higashi, C.
    Michel, M. D.
    Reis, A.
    Loguercio, A. D.
    Gomes, O. M. M.
    Gomes, J. C.
    OPERATIVE DENTISTRY, 2009, 34 (01) : 51 - 57
  • [25] Investigation of mechanical behavior of cobalt-based intermetallic materials using a nano-indentation technique
    Liu, R.
    Yao, M. X.
    Patnaik, P. C.
    Wu, X. J.
    JOURNAL OF ADVANCED MATERIALS, 2007, : 65 - 75
  • [26] Mechanical properties of self-ion irradiated pure tungsten using nano-indentation test and micro-tensile test
    Yu, J. H.
    Kurotaki, H.
    Ando, M.
    Nozawa, T.
    NUCLEAR MATERIALS AND ENERGY, 2022, 30
  • [27] Sample size effect on micro-mechanical properties of gold electroplated with dense carbon dioxide
    Tang, Haochun
    Hashigata, Ken
    Chang, Tso-Fu Mark
    Chen, Chun-Yi
    Nagoshi, Takashi
    Yamane, Daisuke
    Konishi, Toshifumi
    Machida, Katsuyuki
    Masu, Kazuya
    Sone, Masato
    SURFACE & COATINGS TECHNOLOGY, 2018, 350 : 1065 - 1070
  • [28] Nano-indentation for probing mechanical properties of nanocomposites based on ethylene butyl acrylate copolymer and carbon black
    Bentoumi, Mohamed
    Mdarhri, Ahmed
    Montagne, Alex
    Nourdine, Ali
    El Aboudi, Ilham
    Iost, Alain
    JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (35)
  • [29] Effect of nanocrystalline silver impregnation on mechanical properties of diamond-like-carbon films by nano-indentation
    Paul, R.
    Dey, A.
    Mukherjee, A. K.
    Sarangi, S. N.
    Pal, A. K.
    INDIAN JOURNAL OF PURE & APPLIED PHYSICS, 2012, 50 (04) : 252 - 259
  • [30] Analysis of Solvent Effect on Mechanical Properties of Poly(ether ether ketone) Using Nano-indentation
    Iqbal, Tanveer
    Yasin, Saima
    Shakeel, Ahmad
    Mahmood, Hamayoun
    Nazir, Fahad
    Luckham, Paul F.
    CHINESE JOURNAL OF CHEMICAL PHYSICS, 2018, 31 (02) : 211 - 215