Kinematics and Workspace of a Spatial 3-DoF Manipulator with Anti-parallelogram joints

被引：0

作者：

Muralidharan, Vimalesh ^{[1
]}

Chevallereau, Christine ^{[1
]}

Wenger, Philippe ^{[1
]}

机构：

[1] Nantes Univ, CNRS, UMR 6004, Ecole Cent Nantes,LS2N, F-44000 Nantes, France

来源：

ADVANCES IN ROBOT KINEMATICS 2024, ARK 2024 | 2024年 / 31卷

关键词：

Anti-parallelogram joint; spatial manipulator; inverse kinematics; workspace; ROBOT;

D O I：

10.1007/978-3-031-64057-5_5

中图分类号：

TP24 [机器人技术];

学科分类号：

080202 ; 1405 ;

摘要：

This paper introduces a novel spatial serial manipulator composed of three anti-parallelogram (X) joints arranged in two perpendicular planes and separated by offsets. The position of a point on the terminal link is controlled through the three joint angles. The inverse kinematic problem is solved analytically by decomposing it into two planar sub-problems. It is shown that this problem admits up to thirty-two solutions, and an example with these many solutions is presented. The singularities of this manipulator are derived and interpreted geometrically. Finally, the workspace of this manipulator accounting for the joint limits of each X-joint is visualized.

引用

页码：32 / 42

页数：11

共 50 条

[31] Design of a 3-DOF Parallel Manipulator to Compensate for Disturbances in Facade Cleaning
Park, Garam
Hong, Jooyoung
Yoo, Sungkeun
Kim, Hwa Soo
Seo, Taewon
IEEE ACCESS, 2020, 8 : 9015 - 9022
[32] Kinematic analysis and design of a new 3-DOF translational parallel manipulator
Li, Yangmin
Xu, Qingsong
JOURNAL OF MECHANICAL DESIGN, 2006, 128 (04) : 729 - 737
[33] Dimensional Synthesis of a 3-DOF Parallel Manipulator with Full Circle Rotation
Ni Yanbing
Wu Nan
Zhong Xueyong
Zhang Biao
CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2015, 28 (04) : 830 - 840
[34] Design And Analysis of Experiments in ANFIS Modeling of a 3-DOF Planner Manipulator
Gaafar, Muhammed
Maged, Ahmed
Magdy, M.
Mansour, Nader A.
El-Betar, Ahmed
2018 PROCEEDINGS OF THE INTERNATIONAL JAPAN-AFRICA CONFERENCE ON ELECTRONICS, COMMUNICATIONS, AND COMPUTATIONS (JAC-ECC 2018), 2018, : 169 - 172
[35] Optimal design of a 3-leg 6-DOF parallel manipulator for a specific workspace
Fu Jianxun
Gao Feng
CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2016, 29 (04) : 659 - 668
[36] Kinematics, workspace and singularities analysis of the 3-UPU wrist manipulator
Chebbi, Ahmed Hachem
Affi, Zouhaier
Romdhane, Lotfi
Lecture Notes in Mechanical Engineering, 2013, 1 : 45 - 52
[37] Workspace Analysis of Two Similar 3-DOF Axis-Symmetric Parallel Manipulators
Marlow, Kristan
Isaksson, Mats
Abdi, Hamid
Nahavandi, Saeid
2014 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS 2014), 2014, : 1690 - 1696
[38] Novel Design and Analysis of a 3-DOF Parallel Kinematic Manipulator with Actuator Redundancy
Zhang, Dan
Li, Jian
Gao, Zhen
Gao, Feng
2011 9TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA 2011), 2011, : 953 - 958
[39] MINIMUM-JERK TRAJECTORY PLANNING OF A 3-DOF TRANSLATIONAL PARALLEL MANIPULATOR
Lu, Song
Li, Yangmin
INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 5C, 2016,
[40] Dynamic Model and Inverse Kinematic Identification of a 3-DOF Manipulator Using RLSPSO
Batista, Josias
Souza, Darielson
dos Reis, Laurinda
Barbosa, Antonio
Araujo, Rui
SENSORS, 2020, 20 (02)

← 1 2 3 4 5 →