Comparison of Theoretical Methods Describing the Heat Transfer in Vertical Tube Condensers Under Conditions Corresponding to the Condensation of Flue Gas From a Biomass Boiler

A theoretical and experimental study was conducted on the condensation of water vapor in a vertical tube condenser under conditions corresponding to the condensation of flue gas from a biomass boiler, where fl ue gas is considered a mixture of water vapor and a high content of noncondensable gas (NCG). Four fundamental theoretical methods were identified for determining the heat transfer coefficient and condenser heat output-empirical correlations, heat and mass transfer analogy, diffusion layer theory, and boundary layer theory. These methods were compared in terms of their usability in the design of fl ue gas condensers in energy systems and experimentally verified. Experiments were carried out in a 1.5 m long vertical double-pipe condenser with a condensing gas fl owing in a downward direction through an inner tube with a diameter of 25 mm. The mass concentration of NCG in a mixture with water vapor ranged from 11 vol% to 86 vol% and the inlet Reynolds number of the condensing gas ranged from 1936 to 14,408, which corresponds with the conditions of condensing flue gas from biomass boilers. The boundary layer theory is highly complex and impractical for the calculation of heat exchangers. Empirical correlations have a wide dispersion of the result, because they consider only the fundamental parameters of the process. Nevertheless, heat and mass transfer analogy and diffusion layer theory seem to be the most suitable for flue gas condensers since they capture the physical essence of the phenomena.