Mechanism and Performance Characterization of Heat Treatment on Laser-Cladded Ni-WC Coatings

被引：0
作者：
Zhou, Mingu [1 ]
Cui, Wenbo [1 ]
Chen, Zexi [1 ]
Wang, Hongkun [1 ]
Yi, Xuemei [1 ]
机构：
[1] Northwest A&F Univ, Inst Water Saving Agr Arid Areas China IWSA, Xinong Rd 22, Xianyang 712100, Peoples R China
来源：
COATINGS | 2024年 / 14卷 / 12期
关键词：
laser cladding; Ni-WC coatings; annealing; wear resistance; MICROSTRUCTURE; HARDNESS; ALLOY; WEAR;
D O I：
10.3390/coatings14121557
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To enhance the wear resistance of laser-cladded Ni-WC coatings, recrystallization and stress-relief annealing treatments were applied. The effects of different annealing treatments on the friction performance of the coatings were analyzed using XRD, SEM, and a friction wear tester. The results showed that recrystallization annealing refined the grains and transformed the Ni4B3 phase, with the lowest crack rate (10.1%) observed at 800 degrees C. Stress-relief annealing effectively released residual stress, achieving the lowest crack rate (6.3%) at 500 degrees C, while promoting the transformation of the Cr7C3 phase and improving coating stability. Furthermore, recrystallization annealing was more suitable for enhancing wear resistance, as the coating treated at 800 degrees C exhibited a lower friction coefficient (0.46) and the smallest wear volume (0.351 mm3). In contrast, stress-relief annealing was more effective in improving hardness, with the coating treated at 500 degrees C achieving the highest microhardness (936.54 HV1).
引用
收藏
页数：17
相关论文
共 41 条
  • [1] Zheng Y., Lian G., Lu H., Chen C., Huang X., Defects
  • [2] organization, and properties of TiB2–TiC Bi-ceramic phase by laser cladding in situ synthesis, Ceram. Int, 50, pp. 41097-41116, (2024)
  • [3] Kumari R., Kumar S., Das A.K., Murmu A.M., Kanchan K., Microstructural characterization and corrosion analysis of HA/TiO<sub>2</sub> and HA/ZrO<sub>2</sub> composite coating on Ti- alloy by laser cladding, Appl. Surf. Sci. Adv, 24, (2024)
  • [4] Zhu Z., Ren X., Jin K., Tan H., Zhu S., Cheng J., Guo J., Yang J., Current-carrying tribological properties and wear mechanisms of Mo-containing Cu alloy coatings produced by laser cladding, Tribol. Int, 200, (2024)
  • [5] Zhao Y., Liu Y., Wu Y., Zhang Z., Liu J., Xie S., Deng L., Ge C., Chen C., Chen H., Steel-based brake disc laser cladding coating preparation method and brake performance study, Eng. Fail. Anal, 167, (2025)
  • [6] Zhu L., Xue P., Lan Q., Meng G., Ren Y., Yang Z., Xu P., Liu Z., Recent research and development status of laser cladding: A review, Opt. Laser Technol, 138, (2021)
  • [7] Lewis S.R., Lewis R., Goodwin P.S., Fretwell-Smith S., Fletcher D.I., Murray K., Jaiswal J., Full-scale testing of laser clad railway track
  • [8] Case study—Testing for wear, bend fatigue and insulated block joint lipping integrity, Wear, 376, pp. 1930-1937, (2017)
  • [9] Korsmik R., Zadykyan G., Tyukov S., Klimova-Korsmik O., Dmitrieva A., Prediction of Occurrence of Hot Cracks in Laser Cladding Heat Resistant Nickel Alloys, Metals, 13, (2023)
  • [10] Khorram A., Jamaloei A.D., Sepehrnia R., Analysis of solidification crack behavior for Amdry 997 coating on Inconel 713 LC superalloy by laser cladding process, Optik, 264, (2022)
12345