A Power Analysis Method for Self-Interference Signal Components in Full-Duplex Transceivers Under Constant/Nonconstant Modulus Signal Stimulation

The existence of multiple self-interference (SI) signal components, particularly the nonlinear ones, seriously constrains the performance of self-interference cancellation (SIC) methods. To decrease the complexity of SIC methods in full-duplex devices, this article proposes a power analysis method for SI signal components in a full-duplex transceiver. The proposed method comprises a separate analysis algorithm and a system-level power model. Initially, the algorithm is conducted to obtain the spectrum of the linear and nonlinear components in the power amplifier (PA) output signal. Once the linear-to-nonlinear power ratio (LNPR) has been obtained, a system-level power model is constructed by taking both the transmitter noise and analog-to-digital converter (ADC) quantization noise into account. The proposed power model allows for the allocation of SIC method performance in multiple domains during the design of full-duplex transceivers at the top level, thereby reducing the overall system complexity. The simulation results demonstrate that in a full-duplex transceiver with only antenna isolation, the power of the SI signal component is susceptible to alterations due to the operating waveform and transmission power. Finally, the accuracy of the power analysis method is verified through measurement and Simulink.