Enhancing the mechanical properties of Ti-6554 alloys through an innovative strategy of magnetic field treatment before aging

被引:0
作者
Che, Bo [1 ]
Huang, Liang [1 ]
Zhou, Wei [1 ]
Gan, Wenxin [1 ]
Yu, Yao [1 ]
Chen, Jingdong [1 ]
机构
[1] Huazhong Univ Sci & Technol, Sch Mat Sci & Engn, State Key Lab Mat Proc & Die & Mould Technol, Wuhan 430074, Peoples R China
基金
中国国家自然科学基金;
关键词
Ti-6554; alloy; Magnetic field; Aging; Dislocation; alpha phase; Strength; MICROSTRUCTURE; PERFORMANCE; BEHAVIOR;
D O I
10.1016/j.jallcom.2025.179184
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Titanium alloys inevitably experience a reduction in ductility as strength improves. This study focuses on enhancing the strength of the Ti-6554 metastable beta titanium alloy through an innovative strategy involving magnetic field treatment before aging, while preserving its high ductility. Magnetic field treatment provides energy, accelerates dislocation motion, and increases the density of geometrically necessary dislocations. Meanwhile, the magnetic field can promote the transformation of beta phase to alpha phase and increase the volume fraction of alpha phase from 6.1 % to 8.4 %. The dislocations generated by the magnetic field serve as energy sources and precipitation sites for the subsequent aging precipitation of alpha phase, increasing the volume fraction of alpha phase to 11.1 %. As the alpha phase content increases, the alpha/beta phase interface also increases. Dislocations accumulate at the phase interface, hindering dislocation movement and contributing to the strengthening of the alloy at the phase interface. The samples treated with a magnetic field before aging exhibited higher strength and ductility than those treated with the conventional solution and aging process under the same parameters. Moreover, the magnetic field treatment increased elongation by similar to 32 %, resulting in the alloy exhibiting a magnetoplastic effect. Strength is improved by lattice friction stress, grain boundary strengthening, dislocation strengthening, and interface strengthening. Ductility is guaranteed by coordinated deformation through the primary alpha phase, alpha/beta interface, and activated pyramidal <c+a> slip.
引用
收藏
页数:11
相关论文
共 41 条
[1]  
Huet A., Nait-Ali A., Giroud T., Villechaise P., Hemery S., Onset of plastic deformation and strain localization in relation to β phase in metastable β and dual phase Ti alloys, Acta Mater., 240, (2022)
[2]  
Wang Y.L., Hao M.Y., Li D., Li P., Liang Q.L., Wang D., Zheng Y.F., Sun Q.Y., Wang Y.Z., Enhanced mechanical properties of Ti-5Al-5Mo-5V-3Cr-1Zr by bimodal lamellar precipitate microstructures via two-step aging, Mater. Sci. Eng. A, 829, (2022)
[3]  
Yumak N., Aslantas K., A review on heat treatment efficiency in metastable β titanium alloys: the role of treatment process and parameters, J. Mater. Res. Technol., 9, 6, pp. 15360-15380, (2020)
[4]  
Zhao X.L., Wang Y., Xue H., Jia N., Liu Y., Zhang D.L., The effect of strain rate on deformation-induced α′ phase transformation and mechanical properties of a metastable β-type Ti-30Zr-5Mo alloy, J. Alloy. Comp., 894, (2022)
[5]  
Li C.M., Huang L., Li C.L., Hui S.X., Yu Y., Zhao M.J., Guo S.Q., Li J.J., Research progress on hot deformation behavior of high-strength β titanium alloy: flow behavior and constitutive model, Rare Met, 41, 5, pp. 1434-1455, (2022)
[6]  
Li C.M., Huang L., Zhao M.J., Guo S.Q., Li J.J., Study on microstructure evolution and deformation mechanism of Ti-6554 based on power dissipation efficiency at supertransus temperatures, J. Alloy. Comp., 924, (2022)
[7]  
Yu G.X., Zhao D.X., Li K.E., Chen W., Zhang J.Y., Liu J.X., Li R., Wang X.X., Sun J., Homogeneous α-precipitation and enhanced plasticity in Ti-6Cr-5Mo-5V-4Al high-strength metastable titanium alloy with heterogenous β-structure, Mater. Sci. Eng. A, 858, (2022)
[8]  
Zhou Y., Wang K., Wen X., Xin R.L., Wang J.F., Liu Q., Achieving synergy enhancement of strength and ductility in Ti-6Al-2Sn-4Zr-2Mo-0.1Si alloy by fabricating a new multiscale microstructure, Scr. Mater., 226, (2023)
[9]  
Prithiv T.S., Kloenne Z., Li D., Shi R., Zheng Y.F., Fraser H.L., Gault B., Antonov S., Grain boundary segregation and its implications regarding the formation of the grain boundary α phase in the metastable β-Titanium Ti-5Al-5Mo-5V-3Cr alloy, Scr. Mater., 207, (2022)
[10]  
Zhang H., Zhang J.Y., Liu S.Y., Zhang D.D., Liu G., Sun J., Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates, Acta Mater., 255, (2023)