Analysis of Fatigue Properties of Selective Laser Melting 316L Stainless Workpiece After Post-heat Treatment

被引：1

作者：

Zhao, Xinlong ^{[1
]}

Yang, Shanglei ^{[1
,2
]}

Bi, Junhang ^{[1
]}

Tian, Jiawei ^{[1
]}

Li, Yanlei ^{[1
]}

Huang, Yubao ^{[1
]}

机构：

[1] Shanghai Univ Engn Sci, Sch Mat Engn, Shanghai 201620, Peoples R China

[2] Shanghai Laser Intelligent Mfg & Qual Inspection P, Shanghai 201620, Peoples R China

来源：

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2024年

基金：

中国国家自然科学基金;

关键词：

316L stainless steel; fatigue; heat treatment; selective laser melting; POWDER BED FUSION; MECHANICAL-PROPERTIES; STEEL; BEHAVIOR; MICROSTRUCTURE;

D O I：

10.1007/s11665-024-10412-x

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The selective laser melting (SLM) technology, which uses lasers to melt powder, has been widely applied worldwide. This study focuses on 316L stainless steel, known for its high strength and excellent wear resistance, to investigate the effects of heat treatment at different temperatures (500, 700, 900, 1100 degrees C) on the fatigue behavior of 316L stainless steel. The characteristics of surface fatigue damage, the origins of fatigue cracks, and the relationship between the printing-induced microstructure and mechanical properties were analyzed, through experimentation. The results show that heat treatment at around 700 degrees C is most effective in enhancing the fatigue strength of SLM-316L, with its fatigue life being approximately 19% longer than that of SLM-316L without heat treatment.

引用

页数：13

共 45 条

[41] Cyclic deformation mechanism and fracture behaviour of 316L stainless steel under thermomechanical fatigue loading [J].

Yin, Peng ;

Zhang, Wei ;

Zhang, Yi ;

Yang, Qiaofa ;

Liang, Fei ;

Chang, Le ;

Zhou, Changyu .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 :4484-4499

[42] Low cycle fatigue of additively manufactured thin-walled stainless steel 316L [J].

Yu, Cheng-Han ;

Leicht, Alexander ;

Peng, Ru Lin ;

Moverare, Johan .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 821

[43] Quantifying the mechanisms of keyhole pore evolutions and the role of metal-vapor condensation in laser powder bed fusion [J].

Yu, Tao ;

Zhao, Jidong .

ADDITIVE MANUFACTURING, 2023, 72

[44] Predictive models for fatigue property of laser powder bed fusion stainless steel 316L [J].

Zhang, Meng ;

Sun, Chen-Nan ;

Zhang, Xiang ;

Wei, Jun ;

Hardacre, David ;

Li, Hua .

MATERIALS & DESIGN, 2018, 145 :42-54

[45] A multi-scale experimental investigation for fatigue limit and fatigue crack initiation behavior of powder bed fusion-laser beam 316L stainless steel [J].

Zhu, Wen ;

Moumni, Ziad ;

Zhu, Jihong ;

Zhang, Yahui ;

Li, Shaoying ;

Zhang, Weihong .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 866

← 1 2 3 4 5 →