Synergistic effect of pre-induced dislocations and ZrB2 on mechanical and thermal properties of Al/SiC composite

被引:0
作者
Bhatti, Tahir Mehmood [1 ]
Wang, Yangwei [1 ,2 ]
Baig, Mirza Muhammad Abu Bakar [1 ]
Jamal, Saeed [1 ]
Shehzadi, Fatima [1 ]
Abro, Irfan Ali [1 ]
机构
[1] Beijing Inst Technol, Sch Mat Sci & Engn, Beijing 100081, Peoples R China
[2] Beijing Inst Technol, Tangshan Res Inst, Tangshan 063000, Peoples R China
基金
中国国家自然科学基金;
关键词
Microstructure; Mechanical properties; Thermal analysis; Hybrid aluminum matrix composites (HAMCs); Al-6061/SiC/ZrB2; composites; THERMOPHYSICAL PROPERTIES; DEFORMATION-BEHAVIOR; SIC PARTICLES; MICROSTRUCTURE; CONDUCTIVITY; STRENGTH; HARDNESS; AL2O3; ALLOY; SIZE;
D O I
10.1016/j.ceramint.2024.11.401
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Al/SiC composites are considered promising materials for electronic packaging and thermal management systems, because of their high strength, low CTE, and high thermal conductivity. Despite of promising characteristics, these composites often come at the cost of ductility. To address these issues, varying content of ZrB2 was incorporated in Al/3 wt% SiC composite to fabricate high performance hybrid composites via powder metallurgy. Subsequently, the microstructure evolution, thermophysical, and mechanical properties were investigated in a systematic way. The result shows that the pre-induced dislocations were characterized in Al/3 wt% SiC/0.5 wt% ZrB2 composite, which was further quantitatively estimated by XRD peak broadening analysis. The synergistic effect of pre-induced dislocations and grain refinement brought on by ZrB2 contributed to increase hardness, elongation to fracture, and thermal conductivity, significantly. Most specifically, the hardness, ultimate tensile strength (UTS), elongation to fracture, and ultimate compressive strength (UCS) of Al/3 wt% SiC/0.5 wt% ZrB2 composite were increased to 25.9 %, 33.0 %, 245.8 %, and 32.2 %, respectively, when compared to Al/3 wt % SiC composite. In addition, thermal conductivity was increased to 226.9 W/m.K (53.7 %) and coefficient of thermal expansion (CTE) was slightly decreased, while linear thermal expansion remained consistent in the temperature range of 25-200 degrees C. The thermophysical properties of hybrid Al/3 wt% SiC/0.5 wt% ZrB2 composite enhanced due to the high thermal conductivity of ZrB2, grain refinement, and stabilization effect of dislocations on the thermal expansion. Therefore, it can be stated that the addition of ZrB2 have a positive influence on the hardness, strength and elongation to fracture while maintaining high TC. These promising characteristics making them appealing materials for electronic packaging and thermal management systems.
引用
收藏
页码:4249 / 4260
页数:12
相关论文
共 50 条
[41]   Microstructural evolution and mechanical properties of friction stir processed ZrB2/6061Al nanocomposites [J].
Zhang, Z. Y. ;
Yang, R. ;
Li, Y. ;
Chen, G. ;
Zhao, Y. T. ;
Liu, M. P. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 762 :312-318
[42]   Effect of MoSi2 addition and particle size of SiC on pressureless sintering behavior and mechanical properties of ZrB2-SiC-MoSi2 composites [J].
Mashhadi, Mehri ;
Shambuli, Mahboobeh ;
Safi, Saeed .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2016, 5 (03) :200-205
[43]   Hierarchical microstructure and mechanical properties of extruded ZrB2/2024Al nanocomposite [J].
Zhang, Z. Y. ;
Yang, R. ;
Chen, G. ;
Zhu, Q. ;
Zhao, Y. T. ;
Chen, F. ;
Wang, C. L. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 761
[44]   Mechanical and thermal shock properties of laminated ZrB2-SiC/SiCw ceramics [J].
Zhang, Lulu ;
Wei, Chuncheng ;
Li, Shuang ;
Wen, Guangwu ;
Liu, Yuying ;
Wang, Peng .
CERAMICS INTERNATIONAL, 2019, 45 (05) :6503-6508
[45]   Microstructure and Mechanical Properties of C/(ZrB2–SiC) Composites Produced from Ceramic Ribbons [J].
A. V. Utkin ;
V. E. Prokip ;
D. A. Bannykh ;
M. A. Golosov ;
N. I. Baklanova .
Inorganic Materials, 2022, 58 :183-189
[46]   Effect of ZrB2 Dominate with SiC Particles on the Ablation and Mechanical Properties of Carbon/Novolac-Epoxy (EPN1179) Composite at 3000 C° [J].
Kasmaei, Mehdi Pour Jafari ;
Amiri, Farzad ;
Alaei, Mohammad Hossein .
SILICON, 2025, 17 (02) :421-432
[47]   Densification, mechanical and tribological properties of ZrB2 by SPS: Effect of pulsed current [J].
Chakraborty, S. ;
Mallick, A. R. ;
Debnath, D. ;
Das, P. K. .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 :150-156
[48]   Effect of ZrB2 particles on the microstructure and mechanical properties of hybrid (ZrB2 + Al3Zr)/AA5052 insitu composites [J].
Gautam, Gaurav ;
Mohan, Anita .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 649 :174-183
[49]   Synthesis and mechanical characterisation of self-lubricating Al7075/MoS2/ZrB2 hybrid composite [J].
Dubey, Mukesh ;
Kumar, Narendra ;
Mohan, Sunil .
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2023, 66 (01) :1-16
[50]   ZrB2 nanoparticles transmuting tribological properties of Al3Zr/AA5052 composite [J].
Gautam, Gaurav ;
Kumar, Narendra ;
Mohan, Anita ;
Mohan, Sunil ;
Singh, Devendra .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (10)