Synergistic effect of pre-induced dislocations and ZrB2 on mechanical and thermal properties of Al/SiC composite

被引:0
作者
Bhatti, Tahir Mehmood [1 ]
Wang, Yangwei [1 ,2 ]
Baig, Mirza Muhammad Abu Bakar [1 ]
Jamal, Saeed [1 ]
Shehzadi, Fatima [1 ]
Abro, Irfan Ali [1 ]
机构
[1] Beijing Inst Technol, Sch Mat Sci & Engn, Beijing 100081, Peoples R China
[2] Beijing Inst Technol, Tangshan Res Inst, Tangshan 063000, Peoples R China
基金
中国国家自然科学基金;
关键词
Microstructure; Mechanical properties; Thermal analysis; Hybrid aluminum matrix composites (HAMCs); Al-6061/SiC/ZrB2; composites; THERMOPHYSICAL PROPERTIES; DEFORMATION-BEHAVIOR; SIC PARTICLES; MICROSTRUCTURE; CONDUCTIVITY; STRENGTH; HARDNESS; AL2O3; ALLOY; SIZE;
D O I
10.1016/j.ceramint.2024.11.401
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Al/SiC composites are considered promising materials for electronic packaging and thermal management systems, because of their high strength, low CTE, and high thermal conductivity. Despite of promising characteristics, these composites often come at the cost of ductility. To address these issues, varying content of ZrB2 was incorporated in Al/3 wt% SiC composite to fabricate high performance hybrid composites via powder metallurgy. Subsequently, the microstructure evolution, thermophysical, and mechanical properties were investigated in a systematic way. The result shows that the pre-induced dislocations were characterized in Al/3 wt% SiC/0.5 wt% ZrB2 composite, which was further quantitatively estimated by XRD peak broadening analysis. The synergistic effect of pre-induced dislocations and grain refinement brought on by ZrB2 contributed to increase hardness, elongation to fracture, and thermal conductivity, significantly. Most specifically, the hardness, ultimate tensile strength (UTS), elongation to fracture, and ultimate compressive strength (UCS) of Al/3 wt% SiC/0.5 wt% ZrB2 composite were increased to 25.9 %, 33.0 %, 245.8 %, and 32.2 %, respectively, when compared to Al/3 wt % SiC composite. In addition, thermal conductivity was increased to 226.9 W/m.K (53.7 %) and coefficient of thermal expansion (CTE) was slightly decreased, while linear thermal expansion remained consistent in the temperature range of 25-200 degrees C. The thermophysical properties of hybrid Al/3 wt% SiC/0.5 wt% ZrB2 composite enhanced due to the high thermal conductivity of ZrB2, grain refinement, and stabilization effect of dislocations on the thermal expansion. Therefore, it can be stated that the addition of ZrB2 have a positive influence on the hardness, strength and elongation to fracture while maintaining high TC. These promising characteristics making them appealing materials for electronic packaging and thermal management systems.
引用
收藏
页码:4249 / 4260
页数:12
相关论文
共 50 条
[21]   Effect of sintering temperature on electrical properties of SiC/ZrB2 ceramics [J].
Chen, Junjun ;
Chen, Jian ;
Yao, Xiumin ;
Chen, Zhongming ;
Liu, Xuejian ;
Huang, Zhengren .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2018, 38 (09) :3083-3088
[22]   Effect of Milling on the Mechanical Properties of Chopped SiC Fiber-Reinforced ZrB2 [J].
Pienti, L. ;
Sciti, D. ;
Silvestroni, L. ;
Guicciardi, S. .
MATERIALS, 2013, 6 (05) :1980-1993
[23]   In situ synthesis, microstructure, mechanical properties and thermal shock resistance of (ZrB2 + SiC)/Zr2[Al(Si)]4C5 composites [J].
Yang, Jian ;
Guo, Dongdong ;
Yu, Lei ;
Pan, Limei ;
Qiu, Tai ;
Zhang, Jingxian .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 46 :101-108
[24]   Effect of Ni and C additives on pressureless sintering and mechanical properties of ZrB2 [J].
Mousavi, M. J. ;
Zakeri, M. ;
Rahimipour, M. R. ;
Amini, E. .
ADVANCES IN APPLIED CERAMICS, 2015, 114 (05) :261-266
[25]   Influence of ZrB2 Nanoparticles on the Mechanical and Thermal Behaviors of Carbon Nanotube Reinforced Resol Composite [J].
Amirsardari, Zahra ;
Mehdinavaz-Aghdam, Rouhollah ;
Salavati-Niasari, Masoud ;
Jahannama, Mohammad Reza .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2016, 32 (07) :611-616
[26]   Effect of different sintering aids on thermo-mechanical properties and oxidation of SiC fibers - Reinforced ZrB2 composites [J].
Sciti, D. ;
Silvestroni, L. ;
Saccone, G. ;
Alfano, D. .
MATERIALS CHEMISTRY AND PHYSICS, 2013, 137 (03) :834-842
[27]   Effect of the Content of SiC on Properties of ZrB2-SiC-Zr2Al4C5 Composite Ceramics [J].
Guo Qilong ;
Pei Junjun ;
Wang Jing ;
Li Junguo ;
Zhang Lianmeng .
RARE METAL MATERIALS AND ENGINEERING, 2018, 47 :282-287
[28]   Microstructure, Mechanical, and Thermal Properties of (ZrB2 + ZrC)/Zr3[Al (Si)]4C6 Composite [J].
Yu, Lei ;
Yang, Jian ;
Qiu, Tai ;
Zhang, Jingxian ;
Pan, Limei .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2014, 97 (09) :2950-2956
[29]   Effect of graphite flake orientation on microstructure and mechanical properties of ZrB2-SiC-graphite composite [J].
Zhou, Shanbao ;
Wang, Zhi ;
Zhang, Wei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 485 (1-2) :181-185
[30]   ZrB2/SiC as a protective coating for C/SiC composites: Effect of high temperature oxidation on mechanical properties and anti-ablation property [J].
Xiang Yang ;
Li Wei ;
Wang Song ;
Zhang Bi-feng ;
Chen Zhao-hui .
COMPOSITES PART B-ENGINEERING, 2013, 45 (01) :1391-1396