Combined Distal Interphalangeal Joint Arthrodesis With Proximal Interphalangeal Joint Arthroplasty or Arthrodesis: Technical Considerations

Combined distal interphalangeal joint (DIP) arthrodesis with proximal interphalangeal joint (PIP) arthroplasty or arthrodesis presents unique challenges. Although less common than isolated surgery for the DIP and PIP joints, with an aging population, combined DIP and PIP procedures are an increasingly encountered occurrence. Anatomical and morphological studies have provided length and width measurement standards for the middle and distal phalanges, allowing for planning to assess the compatibility of strategies. Besides reviewing anatomical studies to provide length and width guidelines for hardware placement, we will also discuss optimal hardware combinations for combined surgical intervention in the DIP and PIP joints. Conflict may exist between hardware used for the DIP arthrodesis and implants used for the PIP arthroplasty. As an example, if K-wires are used for DIP arthrodesis, any intervention in the PIP joint will be compatible. However, if headless screws are used for DIP arthrodesis, these should ideally not reach proximal to the midpoint of the middle phalanx. Other techniques, such as single or multiple oblique screws, and tension bands are compatible with PIP arthroplasty. Hence, options for management of the PIP joint are dependent on the technique used for DIP arthrodesis. (J Hand Surg Am. 2025;50(2):223e229. Copyright (c) 2025 by the American Society for Surgery of the Hand. All rights are reserved, including those for text and data mining, AI training, and similar technologies.)