Improving the Mechanical Properties of Al-Si Composites through the Synergistic Strengthening of TiB2 Particles and BN Nanosheets

被引：2

作者：

Wang, Yiren ^{[1
]}

Wang, Jian ^{[2
]}

Xu, Zunyan ^{[2
]}

Xu, Baoqiang ^{[1
]}

Yu, Bingheng ^{[2
]}

Dong, Jianwu ^{[2
]}

Li, Caiju ^{[2
]}

机构：

[1] Kunming Univ Sci & Technol, Fac Met & Energy Engn, Kunming 650093, Peoples R China

[2] Kunming Univ Sci & Technol, Fac Mat Sci & Engn, Kunming 650093, Peoples R China

来源：

METALS | 2024年 / 14卷 / 09期

基金：

中国国家自然科学基金;

关键词：

aluminum silicon composite; powder metallurgy; microstructure; mechanical properties; MICROSTRUCTURES; ALLOYS; SR; CU;

D O I：

10.3390/met14090957

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The size and distribution of the silicon phase and intermetallic phase are important factors affecting the properties of Al11Si3Cu2NiMg alloy (M142). In this study, BNNS and micro-TiB2 were used to synergistically refine and reinforce M142 composites (M142-BNNS-TiB2). After T6 heat treatment, the comprehensive mechanical properties of M142-BN-TiB2 composites were excellent, with an ultimate tensile strength of 463 MPa and an elongation of 2.6%. In addition, the introduction of BNNS and micro-TiB2 changed the fracture mode of M142 from brittle fracture to quasi-cleavage fracture, and the introduction of BNNS and micro-TiB2 refined the Si phase and intermetallic phase, which could change the origin of the crack in the composite, thus improving the ductility of the composite.

引用

页数：13

共 37 条

[1] Al-TiB2 micro/nanocomposites: Particle capture investigations, strengthening mechanisms and mathematical modelling of mechanical properties
Akbari, Mohammad Karbalaei
Shirvanimoghaddam, Kamyar
Hai, Zhenyin
Zhuiykov, Serge
Khayyam, Hamid
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 682 : 98 - 106
[2] Effects of zinc content on strength and wear performance of Al-12Si-3Cu based alloy
Alemdag, Yasin
Beder, Murat
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (12) : 2463 - 2471
[3] Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloy
Asghar, Z.
Requena, G.
Zahid, G. H.
Rafi-ud-Din
[J]. MATERIALS CHARACTERIZATION, 2014, 88 : 80 - 85
[4] Influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties of Al-12Si-3Cu based alloy
Beder, M.
Alemdag, Y.
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (08) : 2208 - 2219
[5] Effect of carbon nanotubes' addition on mechanical properties and thermal conductivity of copper
Borodianskiy, Konstantin
[J]. JOURNAL OF MATERIALS SCIENCE, 2019, 54 (21) : 13767 - 13774
[6] Effect of Additions of Ceramic Nanoparticles and Gas-Dynamic Treatment on Al Casting Alloys
Borodianskiy, Konstantin
Selivorstov, Vadim
Dotsenko, Yuri
Zinigrad, Michael
[J]. METALS, 2015, 5 (04): : 2277 - 2288
[7] Preparation of Al-Si alloys by a rapid solidification and powder metallurgy route
Cai, Zhiyong
Zhang, Chun
Wang, Richu
Peng, Chaoqun
Qiu, Ke
Feng, Yan
[J]. MATERIALS & DESIGN, 2015, 87 : 996 - 1002
[8] Advancements in microstructure, texture characterization, and mechanical properties of powder metallurgy Al-Si-Mg-Fe alloy for engineering applications
Chang, Kai-Chieh
Hung, Fei-Yi
Zhao, Jun-Ren
Miu, Chi-Fong
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 973
[9] Microstructure and mechanical properties of in-situ TiB2/AlSi7Mg composite via powder metallurgy and hot extrusion
Chen, Cunguang
Sun, Chunfang
Wang, Wenwen
Qi, Miao
Han, Weihao
Li, Yang
Liu, Xinhua
Yang, Fang
Guo, Leichen
Guo, Zhimeng
[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 : 1282 - 1292
[10] Nanopowder derived Al/h-BN composites with high strength and
Corthay, Shakti
Kutzhanov, Magzhan K.
Matveev, Andrei T.
Bondarev, Andrey, V
Leybo, Denis, V
Shtansky, Dmitry, V
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 912

← 1 2 3 4 →