Cu-trimesate and mesoporous silica composite as adsorbent showing enhanced CO2/CH4 and CO2/N2 selectivity for biogas and flue gas separation

Due to their diverse structure, high porosity, and tunable functionality, Metal-Organic Frameworks (MOFs) hold great potential as materials for diverse applications, including gas separation. Material science researchers are focusing on creating flexible materials that have special properties. Most of the latest research mainly concentrates on fabricating composite materials of MOFs and other functional materials. These MOF-based composites can mitigate the limitations of pure MOFs and may even perform better than the individual components. Here, we present a systematic study on the effect of solvent in synthesising a composite (Cu-BTC@SBA-15) of Cutrimesate MOF (aka CuBTC) and ordered mesoporous silica SBA-15, showing considerable improvement in selectivity for CO2 adsorption from the flue gas and biogas. The pristine Cu-BTC, SBA-15 and the composites with different content of Cu-BTC were characterized by PXRD, BET, FT-IR, SEM, TEM and TGA techniques. The pure gas adsorption isotherms were measured for CO2, CH4, and N2 gases. Ideal Adsorbed Solution Theory (IAST) is used for the binary selectivity calculations for gas systems such as CO2/CH4 and CO2/N2 in the context of biogas and flue gas separation. The composite exhibited an increase in CO2/CH4 selectivity by 39 % compared to pure Cu-BTC and 85 % compared to pure SBA-15. For the CO2/N2 system, the composite showed 38 % higher selectivity than Cu-BTC. The work has significance in the design of effective MOF-based composites for CO2 separation. Our work might open up a new route to design multifunctional materials for worldwide applications through an adsorptive and or mixed matrix membrane route.