A concept of CSS surface for describing the thermo-mechanical volume change of unsaturated bentonite

被引:0
|
作者
Wang, Yang [1 ]
Ye, Wei-Min [1 ,2 ]
Wang, Qiong [1 ]
Chen, Yong-Gui [1 ]
机构
[1] Tongji Univ, Minist Educ, Key Lab Geotech & Underground Engn, Shanghai 200092, Peoples R China
[2] Minist Educ, United Res Ctr Urban Environm & Sustainable Dev, Shanghai 200092, Peoples R China
基金
国家重点研发计划;
关键词
bentonite; thermo-mechanical coupled; volume change behavior; critical saturated state (CSS) surface; HYDRO-MECHANICAL BEHAVIOR; HYDROMECHANICAL BEHAVIOR; CONSTITUTIVE MODEL; SATURATED CLAYS; SUCTION; TEMPERATURE; MIXTURE; COMPRESSION; KNOWLEDGE;
D O I
10.1139/cgj-2024-0065
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
In this work, two types of thermo-mechanical volume change tests were carried out on unsaturated GMZ bentonite specimens. Results of temperature-suction controlled compression tests indicated that the virgin compression lines of unsaturated bentonite eventually converged toward that of saturated bentonite. With the concept of critical saturated state (CSS) curve, bilinear normal consolidation lines with consideration of temperature were proposed. Results of thermal loading tests indicated that the effects of over-consolidation ratio on the thermal volume change behavior of unsaturated and saturated bentonite were similar, while, the suction effect on the thermal volume change behavior of unsaturated bentonite was different in unsaturated and critical saturated state. Based on the test results, a new concept of CSS surface was proposed in the stress space (s-p-T space) for compacted bentonite. In the new framework, the thermo-mechanical volume change behavior of unsaturated bentonite could be well described. The results obtained in this work could provide a new conception for developing the thermo-mechanical constitutive model for unsaturated bentonite.
引用
收藏
页数:16
相关论文
共 49 条
  • [41] Hydro-mechanical coupling effects on volume change and water retention behaviour of unsaturated expansive soils during compression
    College of Civil Engineering, Xinyang Normal University, Xinyang
    464000, China
    不详
    430071, China
    Yantu Gongcheng Xuebao, 4 (629-640): : 629 - 640
  • [42] Surface microstructural alterations and grain refinement mechanisms of tungsten heavy alloys by thermo-mechanical coupling: A laser-assisted milling case
    Xu, Zhiwei
    Bai, Jinxuan
    Qian, Linmao
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 108 : 359 - 372
  • [43] Volume change response and fabric evolution of granular MX80 bentonite along different hydro-mechanical stress paths
    Alessio Ferrari
    Jose A. Bosch
    Patrycja Baryla
    Marco Rosone
    Acta Geotechnica, 2022, 17 : 3719 - 3730
  • [44] Visualizing Shock Induced Thermo-Mechanical Change at Bi-Crystal Interface Using Laser Array Based Nano-Second Raman Spectral Imaging
    Dhiman, A.
    Dillard, T. A.
    Ehler, A.
    Karmarkar, S.
    Tomar, V.
    JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS, 2023, 9 (04) : 334 - 344
  • [45] A Semi-analytical and Experimental Approach Using Molecular Dynamic Simulation for Thermo-mechanical Properties of Surface Functionalized Epoxy/Polyurethane/MWCNT/ZnMoO4 Nanocomposites
    Sarafrazi, Marzieh
    Ghasemi, Ahmad Reza
    Hamadanian, Masood
    FIBERS AND POLYMERS, 2021, 22 (08) : 2306 - 2315
  • [46] Modelling non-isothermal volume change and solute transport behaviours of a semi-permeable clay soil under the combined influence of mechanical loading, chemical-osmosis, and thermo-osmosis
    Zhang, Zhihong
    Masum, Shakil A.
    Tian, Gailei
    Thomas, Hywel R.
    ENGINEERING GEOLOGY, 2021, 293
  • [47] A multiscale finite element modeling for predicting the surface integrity induced by thermo-mechanical loads during high-speed milling of Ti-6Al-4V
    Ullah, Irfan
    Akinlabi, Esther T.
    Songmene, Victor
    Kouam, Jules
    Sadeghifar, Morteza
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2024, 52 : 246 - 263
  • [48] Multiple relaxation mechanism-based thermo-mechanical constitutive model describing cyclic shape memory effect of shape memory polyurethane基于多级松弛机制的形状记忆聚氨酯循环热-力学本构模型
    Zhihong Liang
    Jian Li
    Kaijuan Chen
    Chao Yu
    Qianhua Kan
    Acta Mechanica Sinica, 2024, 40
  • [49] Thermo-Mechanical Coupling Analyses for Al Alloy Brake Discs with Al2O3-SiC(3D)/Al Alloy Composite Wear-Resisting Surface Layer for High-Speed Trains
    Jiang, Lan
    Jiang, Yanli
    Yu, Liang
    Yang, Hongliang
    Li, Zishen
    Ding, Youdong
    MATERIALS, 2019, 12 (19)