A concept of CSS surface for describing the thermo-mechanical volume change of unsaturated bentonite

被引:0
|
作者
Wang, Yang [1 ]
Ye, Wei-Min [1 ,2 ]
Wang, Qiong [1 ]
Chen, Yong-Gui [1 ]
机构
[1] Tongji Univ, Minist Educ, Key Lab Geotech & Underground Engn, Shanghai 200092, Peoples R China
[2] Minist Educ, United Res Ctr Urban Environm & Sustainable Dev, Shanghai 200092, Peoples R China
基金
国家重点研发计划;
关键词
bentonite; thermo-mechanical coupled; volume change behavior; critical saturated state (CSS) surface; HYDRO-MECHANICAL BEHAVIOR; HYDROMECHANICAL BEHAVIOR; CONSTITUTIVE MODEL; SATURATED CLAYS; SUCTION; TEMPERATURE; MIXTURE; COMPRESSION; KNOWLEDGE;
D O I
10.1139/cgj-2024-0065
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
In this work, two types of thermo-mechanical volume change tests were carried out on unsaturated GMZ bentonite specimens. Results of temperature-suction controlled compression tests indicated that the virgin compression lines of unsaturated bentonite eventually converged toward that of saturated bentonite. With the concept of critical saturated state (CSS) curve, bilinear normal consolidation lines with consideration of temperature were proposed. Results of thermal loading tests indicated that the effects of over-consolidation ratio on the thermal volume change behavior of unsaturated and saturated bentonite were similar, while, the suction effect on the thermal volume change behavior of unsaturated bentonite was different in unsaturated and critical saturated state. Based on the test results, a new concept of CSS surface was proposed in the stress space (s-p-T space) for compacted bentonite. In the new framework, the thermo-mechanical volume change behavior of unsaturated bentonite could be well described. The results obtained in this work could provide a new conception for developing the thermo-mechanical constitutive model for unsaturated bentonite.
引用
收藏
页数:16
相关论文
共 49 条
  • [21] Influences of chemo-mechanical coupling on the volume change behaviour of bentonite
    Qin A.
    Fu X.
    Sun D.
    Ruan K.
    Li T.
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2019, 38 : 3775 - 3782
  • [22] Innovative Concept for Analysing a Rock Salt Cavern under Cyclic Thermo-Mechanical Loading
    Blumenthal, A. V.
    Mahmoudi, F.
    Khaledi, K.
    Koenig, D.
    Schanz, T.
    EUROPEAN GEOSCIENCES UNION GENERAL ASSEMBLY 2016, 2016, 97 : 478 - 485
  • [23] Volume change response and fabric evolution of granular MX80 bentonite along different hydro-mechanical stress paths
    Ferrari, Alessio
    Bosch, Jose A.
    Baryla, Patrycja
    Rosone, Marco
    ACTA GEOTECHNICA, 2022, 17 (09) : 3719 - 3730
  • [24] Small scale volume formulation based on coupled thermo-mechanical gradient enhanced plasticity theory
    Song, Yooseob
    Voyiadjis, George Z.
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2018, 134 : 195 - 215
  • [25] Thermo-mechanical behavior and specific volume of highly crosslinked networks based on glycerol dimethacrylate and its derivatives
    Podgorski, Maciej
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2013, 111 (02) : 1235 - 1242
  • [26] Reverse identification of constitutive parameters of Inconel 718 alloy based on analytical model and thermo-mechanical loads analysis of machined surface
    Tian, Pengfei
    He, Lin
    Zhou, Tao
    Du, Feilong
    Zou, Zichuan
    Zhou, Xiaorong
    Jiang, Hongwan
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 16 : 1353 - 1370
  • [27] Multiple relaxation mechanism-based thermo-mechanical constitutive model describing cyclic shape memory effect of shape memory polyurethane
    Liang, Zhihong
    Li, Jian
    Chen, Kaijuan
    Yu, Chao
    Kan, Qianhua
    ACTA MECHANICA SINICA, 2024, 40 (01)
  • [28] Plastic deformation and grain refinement in surface layer induced by thermo-mechanical loads for hard milling process
    Li, BinXun
    Zhang, Song
    Zhang, Jing
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2019, 233 (10) : 2033 - 2046
  • [29] Effect of phase change microcapsules on the thermo-mechanical, fracture and heat storage properties of unidirectional carbon/epoxy laminates
    Fredi, Giulia
    Dorigato, Andrea
    Fambri, Luca
    Unterberger, Seraphin Hubert
    Pegoretti, Alessandro
    POLYMER TESTING, 2020, 91 (91)
  • [30] Thermo-Mechanical Behavior of Novel EPDM Foams Containing a Phase Change Material for Thermal Energy Storage Applications
    Bianchi, Marica
    Valentini, Francesco
    Fredi, Giulia
    Dorigato, Andrea
    Pegoretti, Alessandro
    POLYMERS, 2022, 14 (19)