Face-centered-cubic (FCC) to body-centered-cubic (BCC) phase-transformation-induced strengthening of nanoscale harmonic-like high-entropy alloys

被引:0
作者
Ma, Huwen [1 ,2 ]
Zhao, Yanchun [1 ,2 ]
Su, Yu [1 ]
Yu, Zhiqi [1 ]
Liaw, Peter K. [3 ]
机构
[1] Lanzhou Univ Technol, Sch Mat Sci & Engn, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China
[2] Lanzhou Univ Technol, Wenzhou Pump & Valve Engn Res Inst, Wenzhou 325105, Peoples R China
[3] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA
基金
美国国家科学基金会; 中国国家自然科学基金;
关键词
High-entropy alloy; Transformation-induced plasticity (TRIP); strengthening (HDI); Molecular dynamics simulation; MECHANICAL-PROPERTIES; MICROSTRUCTURE;
D O I
10.1016/j.matchemphys.2025.130756
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
An heterostructured high-entropy alloy (HEA) effectively overcomes the constraint relationship between the strength and ductility. The transformation-induced plasticity (TRIP) phenomenon induced by the FCC-BCC phase transformation has been proven to significantly improve the comprehensive mechanical properties of HEAs. However, due to the limitations of existing experimental technologies, there are few reports on the synergistic effects of these two mechanisms. In this study, we employed molecular dynamics (MD) to investigate the influence of the harmonic structure and TRIP on the tensile deformation behavior of a Co25Ni25Fe25Al7.5Cu17.5 HEA. The results indicate that the harmonic structure can effectively enhance the alloy's strength, increasing from 1.5 GPa in a polycrystalline structure to 2.2 GPa. With the increase in the coarse-grain diameter (Dsp), the volume fraction of the FCC to BCC transformation increases, and the phase transformation is advanced. The phase transformation mainly occurs in the coarse-grain regions, where the high hardness of BCC phases mismatches mechanically with the surrounding soft grain regions, inducing a heterogeneous deformation-induced (HDI) strengthening mechanism. Therefore, this study opens a new avenue for the subsequent development of HEAs with high strength and high ductility.
引用
收藏
页数:8
相关论文
共 41 条
  • [1] Exceptional phase-transformation strengthening of ferrous medium entropy alloys at cryogenic temperatures
    Bae, Jae Wung
    Seol, Jae Bok
    Moon, Jongun
    Sohn, Seok Su
    Jang, Min Ji
    Um, Ho Yong
    Lee, Byeong-Joo
    Kim, Hyoung Seop
    [J]. ACTA MATERIALIA, 2018, 161 : 388 - 399
  • [2] Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: micro and macromechanical investigations via in situ optical microscopy
    Brinson, LC
    Schmidt, I
    Lammering, R
    [J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2004, 52 (07) : 1549 - 1571
  • [3] Hall-Petch and inverse Hall-Petch relations in high-entropy CoNiFeAlxCu1-x alloys
    Chen, Shuai
    Aitken, Zachary H.
    Wu, Zhaoxuan
    Yu, Zhigen
    Banerjee, Rajarshi
    Zhang, Yong-Wei
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773
  • [4] X-RAY MEASUREMENT OF ORDER IN SINGLE CRYSTALS OF (CU3AU)
    COWLEY, JM
    [J]. JOURNAL OF APPLIED PHYSICS, 1950, 21 (01) : 24 - 29
  • [5] Strength-ductility synergy and grain refinement mechanisms in a Co-Cr-Ni medium-entropy alloy with novel analogous harmonic structure
    Du, Shiyu
    Zhang, Tuanwei
    Jiao, Zhiming
    Zhao, Dan
    Wang, Jianjun
    Xiong, Renlong
    Kim, Hyoung Seop
    Wang, Zhihua
    [J]. SCRIPTA MATERIALIA, 2023, 235
  • [6] Strengthening CrFeCoNiMn0.75Cu0.25 high entropy alloy via laser shock peening
    Fu, Wujing
    Huang, Yongjiang
    Sun, Jianfei
    Ngan, Alfonso H. W.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2022, 154
  • [7] Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy
    Fu, Zhiqiang
    Chen, Weiping
    Wen, Haiming
    Zhang, Dalong
    Chen, Zhen
    Zheng, Baolong
    Zhou, Yizhang
    Lavernia, Enrique J.
    [J]. ACTA MATERIALIA, 2016, 107 : 59 - 71
  • [8] Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
    Gludovatz, Bernd
    Hohenwarter, Anton
    Thurston, Keli V. S.
    Bei, Hongbin
    Wu, Zhenggang
    George, Easo P.
    Ritchie, Robert O.
    [J]. NATURE COMMUNICATIONS, 2016, 7
  • [9] Stress sensitivity origin of extended defects production under coupled irradiation and mechanical loading
    He, Miao
    Yang, Yang
    Gao, Fei
    Fan, Yue
    [J]. ACTA MATERIALIA, 2023, 248
  • [10] The mechanisms of γ (fcc) → ε (hcp) → α′ (bcc) and direct γ (fcc) → α′ (bcc) martensitic transformation in a gradient austenitic stainless steel
    He, Yinsheng
    Gao, Jianbing
    He, Yizhu
    Shin, Keesam
    [J]. JOURNAL OF MATERIALS SCIENCE, 2022, 57 (08) : 5230 - 5240