A New Method of Solving the Forward Kinematic Model of a Planar Five-Bar Mechanism

被引：0

作者：

Saafi, Houssem ^{[1
,2
]}

Lamine, Houssein ^{[1
]}

Mlika, Abdelfattah ^{[1
]}

机构：

[1] Univ Sousse, Natl Engn Sch Sousse, Mech Lab Sousse LMS, Sousse 4000, Tunisia

[2] Univ Gafsa, Preparatory Inst Engn Studies Gafsa, Gafsa 2000, Tunisia

来源：

ROBOTICS AND MECHATRONICS, ISRM 2024 | 2024年 / 158卷

关键词：

Five-bar mechanism; Parallel robots; Forward kinematic model; Optimization; Singularity; PARALLEL MANIPULATORS; DESIGN;

D O I：

10.1007/978-3-031-59888-3_5

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

This paper presents a new method of solving the forward kinematic model (FKM) of a planar five-bar mechanism. First, the new feedback scheme is described, where the sensors are placed on the two passive joints of the Five-bar mechanism. Secondly, the kinematic model is established and the geometric parameters are optimized to fit a prescribed workspace. Finally, the new method of solving the forward kinematic model, based on the cosine law, is presented. A comparison is made between the classical approach and the new approach. Thereby, the advantages of the proposed FKM solving method are discussed.

引用

页码：43 / 52

页数：10

共 10 条

[1] A robust forward-displacement analysis of spherical parallel robots
Bai, Shaoping
Hansen, Michael R.
Angeles, Jorge
[J]. MECHANISM AND MACHINE THEORY, 2009, 44 (12) : 2204 - 2216
[2] THE DIRECT KINEMATICS OF PLANAR PARALLEL MANIPULATORS - SPECIAL ARCHITECTURES AND NUMBER OF SOLUTIONS
GOSSELIN, CM
MERLET, JP
[J]. MECHANISM AND MACHINE THEORY, 1994, 29 (08) : 1083 - 1097
[3] Dynamics-Based Algorithm for Reliable Assembly Mode Tracking in Parallel Robots
Koessler, Adrien
Goldsztejn, Alexandre
Briot, Sebastien
Bouton, Nicolas
[J]. IEEE TRANSACTIONS ON ROBOTICS, 2020, 36 (03) : 937 - 950
[4] A Geometric Approach to Obtain the Closed-Form Forward Kinematics of H4 Parallel Robot
Liu, Yujiong
Kong, Minxiu
Wan, Neng
Ben-Tzvi, Pinhas
[J]. JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2018, 10 (05):
[5] Solving the forward kinematics of a Gough-type parallel manipulator with interval analysis
Merlet, JP
[J]. INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, 2004, 23 (03) : 221 - 235
[6] Optimal design and evaluation of a dexterous 4 DoFs haptic device based on delta architecture
Preault, Celestin
Saafi, Houssem
Laribi, Med Amine
Zeghloul, Said
[J]. ROBOTICA, 2019, 37 (07) : 1267 - 1288
[7] Comparative Kinematic Analysis and Design Optimization of Redundant and Nonredundant Planar Parallel Manipulators Intended for Haptic Use
Saafi, Houssem
Lamine, Houssein
[J]. ROBOTICA, 2020, 38 (08) : 1463 - 1477
[8] Forward kinematic model improvement of a spherical parallel manipulator using an extra sensor
Saafi, Houssem
Laribi, Med Amine
Zeghloul, Said
[J]. MECHANISM AND MACHINE THEORY, 2015, 91 : 102 - 119
[9] Saafi H, 2013, IEEE IND ELEC, P3800, DOI 10.1109/IECON.2013.6699741
[10] Forward Kinematic Analysis of Kinematically Redundant Hybrid Parallel Robots
Wen, Kefei
Gosselin, Clement M.
[J]. JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2020, 12 (06):

← 1 →