A comprehensive study on the effect of high-temperature deformation level on microstructure development of austenitic stainless steel

被引：0
作者：
Rout, Matruprasad [1 ]
Ranjan, Ravi [2 ]
Anand, Kumar Aniket [3 ]
机构：
[1] Natl Inst Technol Tiruchirappalli, Dept Prod Engn, Trichy 620015, Tamil Nadu, India
[2] Tata Steel, Res & Dev Div, Jamshedpur, India
[3] SAIL, Res & Dev Ctr Iron & Steel, Ranchi, India
来源：
MATERIALS AT HIGH TEMPERATURES | 2025年 / 42卷 / 01期
关键词：
Grain boundary; steel; EBSD; deformation; microstructure; CSL; RECRYSTALLIZATION; MECHANISMS; TEXTURE;
D O I：
10.1080/09603409.2025.2453330
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Austenitic stainless steel has been deformed to different strain levels at high temperatures and electron back-scattered diffraction has been done at the centre of the deformed samples to study the microstructure. A low strain of 0.22 develops deformation substructures and does not contribute much to the change in microstructure. An increase in strain value develops equiaxed grains and at 900 degrees C, a necklace-type structure is observed. A decrease in average grain size with increased strain level is observed (except at 1200 degrees C). A high fraction of high-angle grain boundaries with a significant fraction of Sigma 3 boundaries is observed at high temperatures and high-strain levels. The texture intensity showed the formation of strong [101] and [001] fibres. However, the intensity distribution between [101] and [001] varies with strain level and deformation temperature. Finally, discussions on the effect of high-temperature deformation on microstructure and texture development have been presented.
引用
收藏
页码：25 / 38
页数：14
相关论文
共 30 条
[11]   Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel [J].
Kumar, B. Ravi ;
Das, S. K. ;
Mahato, B. ;
Das, Arpan ;
Chowdhury, S. Ghosh .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 :239-244
[12]   A Study on Microstructural Evolution and Dynamic Recrystallization During Isothermal Deformation of a Ti-Modified Austenitic Stainless Steel [J].
Mandal, Sumantra ;
Bhaduri, A. K. ;
Sarma, V. Subramanya .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (04) :1062-1072
[13]  
Mirzadeh H., 2012, SCI ENG A, V538, P236, DOI [10.1016/j.msea.2012.01.037, DOI 10.1016/J.MSEA.2012.01.037]
[14]   Nucleation of dynamic recrystallization and variant selection in copper bicrystals [J].
Miura, H. ;
Sakai, T. ;
Mogawa, R. ;
Jonas, J. J. .
PHILOSOPHICAL MAGAZINE, 2007, 87 (27) :4197-4209
[15]  
Montheillet F., 2005, MOVING GRAIN BOUNDAR
[16]   Strain induced grain boundary migration effects on grain growth of an austenitic stainless steel during static and metadynamic recrystallization [J].
Paggi, A. ;
Angella, G. ;
Donnini, R. .
MATERIALS CHARACTERIZATION, 2015, 107 :174-181
[17]   Grain boundary plane distributions and single-step versus multiple-step grain boundary engineering [J].
Randle, Valerie ;
Jones, Richard .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 524 (1-2) :134-142
[18]   RECRYSTALLIZATION MECHANISMS AND THE ORIGIN OF CUBE TEXTURE IN COPPER [J].
RIDHA, AA ;
HUTCHINSON, WB .
ACTA METALLURGICA, 1982, 30 (10) :1929-1939
[19]   Deformation Behavior and Evolution of Microstructure and Texture During Hot Compression of AISI 304LN Stainless Steel [J].
Rout, Matruprasad ;
Biswas, Somjeet ;
Ranjan, Ravi ;
Pal, Surjya Kanta ;
Singh, Shiv Brat .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (03) :864-880
[20]   EBSD study of microstructure evolution during axisymmetric hot compression of 304LN stainless steel [J].
Rout, Matruprasad ;
Ranjan, Ravi ;
Pal, Surjya K. ;
Singh, Shiv B. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 711 :378-388
123