Surface Roughness Evaluation with Using White Light Interferometry

被引：0

作者：

Kato, Kenichi ^{[1
,2
]}

Akiyama, Yu ^{[1
,3
]}

Fukamachi, Hiroyuki ^{[1
,4
]}

Matsuda, Koji ^{[1
,5
]}

Mouri, Toshihiko ^{[1
,6
]}

Aoki, Atsuya ^{[1
,7
]}

Ozaki, Yukiko ^{[1
,8
]}

Takeda, Yoshinobu ^{[1
]}

机构：

[1] Japan Powder Metallurgy Association, 3-42-7 Taito, Taito-ku, Tokyo

[2] Diamet Corporation, 3-1-1 Kogane-cho, Higashi-ku, Niigata

[3] Sumitomo Electric Sintered Alloy, Ltd., 2901 Nariwa, Nariwa-cho, Takahashi

[4] FINE SINTER CO., LTD., 1189-11 Nishinohora, Akechi-cho, Kasugai

[5] PORITE CORPORATION, 350 Kamiebukuro, Kumagaya

[6] NTN Advanced Material Corporation, 101 Katsutaba, kanieshinden, Ama-gun, Kanie-cho

[7] NPR-RIKEN CORPORATION, 1111 Nogi, Nogi-machi, Shimotsuga-gun

[8] Osaka University, 1-11 Mihogaoka, Ibaraki

来源：

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 2025年 / 72卷

关键词：

2D Roughness; 3D Roughness; White light interferometry;

D O I：

10.2497/jjspm.16C-T11-05

中图分类号：

学科分类号：

摘要：

ISO Standard 23519:2010 defines the surface roughness of sintered metal parts: Rk and Rpk, and it intends to provide relevant surface roughness data regardless of porosity,- however the data reliability tends to be insufficient in practice. The following parameters might influence the surface roughness data in accordance with the standard such as; measuring probe, instruments, filters, and others. The effect of such parameters was investigated and compared with an optical method using white light interferometry. 3 different measuring instruments were used. The measured surfaces of specimens having density of 6.4, 6.8 and 7.2 are punch facing side. In this study, details of the results are presented. ©2025 Japan Society of Powder and Powder Metallurgy.

引用

页码：S1207 / S1211

页数：4