Experimental and Numerical Investigation of High-Pressure Centrifugal Fan Performance

被引：0

作者：

Karaokur, Haci Ibrahim ^{[1
]}

Akay, Orhan Erdal ^{[1
]}

机构：

[1] Kahramanmaras Sutcu Imam Univ, Makine Muhendisligi Bolumu, Kahramanmaras, Turkiye

来源：

KONYA JOURNAL OF ENGINEERING SCIENCES | 2022年 / 10卷 / 01期

关键词：

Fan performance; High pressure radial fan; ANSYS Fluent; ANSI/AMCA-210; DESIGN; OPTIMIZATION;

D O I：

10.36306/konjes.978669

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Centrifugal fans with the volute body; marble, wood, cement, textile, etc. It is used in the transport of various powders in industries. In order for the fans to be used in these applications to work efficiently, the fan performance must be well known. In this study, a high-pressure radial fan whose performance curves are unknown was tested in a wind tunnel designed according to ANSI/AMCA-210 standard and experimental fan performance curves were obtained. Then, performance parameters were calculated using computational fluid dynamics (CFD) methods. Differences between numerical and experimental results were obtained within acceptable limits and the optimum operating range of the fan was determined according to the performance curves obtained. The overlap of the theoretical and experimental approaches used in this study revealed that similar fans can be used as a tested example for the initial design or partial development of existing similar fans in future studies.

引用

页码：215 / 228

页数：14

共 50 条

[41] Experimental and Numerical Investigation for Hydrothermal Performance of the Jet Impingement Microchannel Heat Sink [J].

Pandey, Jyoti ;

Ansari, Mohd. Zahid ;

Husain, Afzal .

ASME JOURNAL OF HEAT AND MASS TRANSFER, 2024, 146 (07)

[42] Assessment of Wind Fin Performance Run by Mixed Flows: Experimental and Numerical Investigation [J].

Abdul Wahhab, Hasanain A. ;

Aljabair, Sattar ;

Ayed, Sadoon K. .

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2021, 46 (12) :12077-12088

[43] Investigation on Vortex Characteristics of a Multi-Blade Centrifugal Fan near Volute Outlet Region [J].

Li, Zhehong ;

Ye, Xinxue ;

Wei, Yikun .

PROCESSES, 2020, 8 (10) :1-18

[44] Numerical study on hypersonic aerodynamic characteristics of the high-pressure capturing wing configuration with wing dihedral [J].

Chang, Siyuan ;

Xiao, Yao ;

Li, Guangli ;

Tian, Zhongwei ;

Cui, Kai .

AEROSPACE SCIENCE AND TECHNOLOGY, 2023, 143

[45] Performance assessment of various fan ribs inside a centrifugal blower [J].

Lee, Young-Tae ;

Lim, Hee-Chang .

ENERGY, 2016, 94 :609-622

[46] Experimental Investigation on Performance Characteristics of Dry Centrifugal Clutch with Grooved Friction Liners [J].

Panchal, Dhruv ;

Patel, Bhavesh ;

Gohil, Hardik .

INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2023, 20 (01) :10152-10164

[47] A numerical investigation on the performance improvement of axial-flow automotive cooling fan with beads [J].

Hur, K. H. ;

Haider, B. A. ;

Sohn, C. H. .

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2020, 34 (08) :3317-3323

[48] Numerical and experimental investigation on uniformity of pressure loads in labyrinth seal [J].

Jiang, Jie ;

Yang, Yiyong ;

Huang, Weifeng ;

Li, Yongjian .

ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (09)

[49] Effect of Motor Installation Heights on the Performance of an Isolated Centrifugal Fan [J].

Li, Zhehong ;

Luo, Ping ;

Zhu, Meijun ;

Chen, Ziyun ;

Liu, Yang ;

Li, Guohui .

PROCESSES, 2023, 11 (07)

[50] Numerical investigation of fan performance in a forced draft air-cooled steam condenser [J].

Bredell, JR ;

Kröger, DG ;

Thiart, GD .

APPLIED THERMAL ENGINEERING, 2006, 26 (8-9) :846-852

← 1 2 3 4 5 →