The first cooldown of SCL3 cryogenic system

被引：0

作者：

Yoon, S. ^{[1
]}

Ki, T. ^{[1
]}

Yoo, J. ^{[1
]}

Lee, M. ^{[1
]}

Meyer, T. A. ^{[2
]}

Bodin, E. J. A. ^{[2
]}

Daoudi, K. ^{[2
]}

机构：

[1] Inst for Basic Sci Korea, Daejeon, South Korea

[2] Air Liquide Adv Technol, Sassenage, France

来源：

ADVANCES IN CRYOGENIC ENGINEERING: PROCEEDINGS OF THE CRYOGENIC ENGINEERING CONFERENCE, CEC 2023 | 2024年 / 1301卷

基金：

新加坡国家研究基金会;

关键词：

D O I：

10.1088/1757-899X/1301/1/012110

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

RAON, Rare isotope Accelerator complex for ON-line experiments, is the first superconducting linear accelerators in S. Korea. It will have three linear accelerators (Linac), SCL1, SCL2, and SCL3. Now, construction of the SCL3, the third superconducting Linac was finished in the middle of 2022 and the commissioning of its cryogenic system was done July, 2022. The first cooldown of the Linac with the cryogenic system was started from September, 2022 and their temperature was reached at 2.05 K in January, 2023. The first cooldown was successfully completed and the static and dynamic heat loads of the Linac were measured. This paper shows the results of the first cooldown and the heat load tests.

引用

页数：7

共 50 条

[41] XRS system - the first cryogenic X-ray detector in orbit
Inst. Space and Astronautical Sci., Sagamihara, 229-8150, Japan
不详
Nucl Instrum Methods Phys Res Sect A, 1-2 (212-217):
[42] FIRST OPERATIONAL EXPERIENCE AND PERFORMANCE OPTIMIZATION OF THE ATLAS MAGNET CRYOGENIC SYSTEM
Delruelle, N.
Barth, K.
Dudarev, A.
Passardi, G.
ten Kate, H. H. J.
ADVANCES IN CRYOGENIC ENGINEERING, VOLS 57A AND 57B, 2012, 1434 : 86 - 93
[43] Validation and performance of the LHC cryogenic system through commissioning of the first sector
Serio, L.
Bouillot, A.
Casas-Cubillos, J.
Chakravarty, A.
Claudet, S.
Gicquel, F.
Gomes, P.
Kumar, M.
Kush, P. K.
Millet, F.
Perin, A.
Rabehl, R.
Singh, M. R.
Soubiran, M.
Tavian, L.
ADVANCES IN CRYOGENIC ENGINEERING, VOLS 53A AND 53B, 2008, 985 : 1411 - +
[44] ARIEL E-linac Cryogenic System: Commissioning and First Operational Experience
Koveshnikov, A.
Bylinskii, I.
Hodgson, G.
Kishi, D.
Laxdal, R.
Ma, Y.
Nagimov, R.
Yosifov, D.
ADVANCES IN CRYOGENIC ENGINEERING, 2015, 101
[45] Optimal design of the first stage of the platefin heat exchanger for the EAST cryogenic system
蒋庆峰
朱志刚
张启勇
庄明
陆小飞
Plasma Science and Technology, 2018, (03) : 167 - 175
[46] FIRST ASSESSMENT OF RELIABILITY DATA FOR THE LHC ACCELERATOR AND DETECTOR CRYOGENIC SYSTEM COMPONENTS
Perinic, G.
Claudet, S.
Alonso-Canella, I.
Balle, C.
Barth, K.
Bel, J. -F.
Benda, V.
Bremer, J.
Brodzinski, K.
Casas-Cubillos, J.
Cuccuru, G.
Cugnet, M.
Delikaris, D.
Delruelle, N.
Dufay-Chanat, L.
Fabre, C.
Ferlin, G.
Fluder, C.
Gavard, E.
Girardot, R.
Haug, F.
Herblin, L.
Junker, S.
Klabi, T.
Knoops, S.
Lamboy, J. -P.
Legrand, D.
Metselaar, J.
Park, A.
Perin, A.
Pezzetti, M.
Penacoba-Fernandez, G.
Pirotte, O.
Rogez, E.
Suraci, A.
Stewart, L.
Tavian, L. J.
Tovar-Gonzalez, A.
Van Weelderen, R.
Vauthier, N.
Vullierme, B.
Wagner, U.
ADVANCES IN CRYOGENIC ENGINEERING, VOLS 57A AND 57B, 2012, 1434 : 1399 - 1406
[47] Optimal design of the first stage of the platefin heat exchanger for the EAST cryogenic system
蒋庆峰
朱志刚
张启勇
庄明
陆小飞
Plasma Science and Technology, 2018, 20 (03) : 167 - 175
[48] Multimodal freezing system for cryogenic 3D printing
Kamble, Pushkar
Chavan, Subodh
Hodgir, Rajendra
Gote, Gopal
Karunakaran, K. P.
Goli, Sandeep
PROGRESS IN ADDITIVE MANUFACTURING, 2022, 7 (06) : 1379 - 1393
[49] Multimodal freezing system for cryogenic 3D printing
Pushkar Kamble
Subodh Chavan
Rajendra Hodgir
Gopal Gote
K. P. Karunakaran
Sandeep Goli
Progress in Additive Manufacturing, 2022, 7 : 1379 - 1393
[50] A CRYOGENIC MEMORY SYSTEM
DOEMLAND, HH
MCCAA, WD
PROCEEDINGS OF THE IEEE, 1963, 51 (12) : 1767 - &

← 1 2 3 4 5 →