A constitutive model for load-deformation of sand-gravel materials in dam alluvium foundation and its engineering application

被引:0
作者
Cao, Weifeng [1 ]
Wen, Lifeng [1 ]
Li, Yanlong [1 ]
Yang, Ying [2 ]
Wang, Tao [3 ]
Wu, Li [4 ]
机构
[1] Xian Univ Technol, State Key Lab Ecohydraul Northwest Arid Reg China, 5 South Jinhua Rd, Xian 710048, Peoples R China
[2] PowerChina Northwest Engn Corp Ltd, Xian 710065, Peoples R China
[3] CCCC Hehai Engn Corp Ltd, Taixing 225400, Peoples R China
[4] Neijiang Water Conservancy & Elect Power Survey &, Neijiang 641000, Peoples R China
基金
中国国家自然科学基金;
关键词
Constitutive model; Alluvium sand-gravel; Triaxial test; Silt content; Numerical simulation; FACE ROCKFILL DAM; LIQUEFACTION; BEHAVIOR; STRENGTH; PERFORMANCE; RESISTANCE; GRADATION;
D O I
10.1016/j.istruc.2025.108330
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper investigates the mechanical properties of sand-gravel (SG) material in alluvium foundation, and further proposes a constitutive model suitable for load-deformation of this type of material. Taking silt content as an influencing factor, triaxial shear tests are carried out under different confining pressure conditions, and the influence of silt content on the material stress and strain characteristics are analyzed. Based on the test results, a new constitutive model for load-deformation of alluvium SG is proposed, which especially considered the strain softening and dilatancy characteristics. In order to simulate alluvium SG materials with varying silt contents consistently, the process for calculating the model parameters is quantified, and a regression relationship between the silt content and the model parameters is constructed. The model is integrated into the finite analysis code based on the modified Euler-Cauchy stress integral algorithm. Finally, taking Miaojiaba rockfill dam constructed on the alluvium foundation as an example, the proposed model is applied to calculate the dam and foundation stress and deformation. The difference between the simulated results and the monitoring data is compared to verify the model validity and practicability. The findings demonstrate that the model can accurately predict the deformation features of the alluvium foundation and that it performs calculations with greater precision than the traditional model.
引用
收藏
页数:13
相关论文
共 37 条
  • [21] Shen Z., A nonlinear dilatant stress-strain model for soils and rock materials, Chin Hydro-Sci Eng, 4, pp. 1-14, (1986)
  • [22] Li X., A sand model with state-dapendent dilatancy, Geotechnique, 52, 3, pp. 173-186, (2002)
  • [23] Zhang G., Zhang J., Yu Y., Modeling of gravelly soil with multiple lithologic components and its application, Soils Found, 47, 4, pp. 799-810, (2007)
  • [24] Salim W., Indraratna B., A new elastoplastic constitutive model for coarse granular aggregates incorporating particle breakage, Can Geotech J, 41, 4, pp. 657-671, (2004)
  • [25] Karalar M., Cavusli M., Evaluation of 3D nonlinear earthquake behaviour of the Ilısu CFR Dam under Far-Fault ground motions, Adv Civ Eng, 1, (2019)
  • [26] Karalar M., Cavusli M., Assessing 3D seismic damage performance of a CFR dam considering various reservoir heights, Earthq Struct, 16, 2, pp. 221-234, (2019)
  • [27] Zhang J., Wang G., Large post-liquefaction deformation of sand, part I: physical mechanism, constitutive description and numerical algorithm, Acta Geotech, 7, 2, pp. 69-113, (2012)
  • [28] Wang R., Zhang J., Wang G., A unified plasticity model for large post-liquefaction shear deformation of sand, Comput Geotech, 59, pp. 54-66, (2014)
  • [29] Wang R., Cao W., Xue L., Zhang J., An anisotropic plasticity model incorporating fabric evolution for monotonic and cyclic behavior of sand, Acta Geotech, 16, 1, pp. 43-65, (2020)
  • [30] (2019)