The chlorination and separation of aluminum using low-temperature sulfur chloride reagents

There is currently no strategy for the permanent waste disposal or recycling for used nuclear fuels from research reactors. For this reason, low-temperature reactions have been developed for the chlorination of the Al alloys and subsequent separation from used nuclear fuels to reduce the volume of high-level waste in storage. Three sulfur chloride reagents - S2Cl2, SOCl2, and SO2Cl2-were tested, and two were found to quantitatively chlorinate Al metal and Al alloys under mild conditions. These low-temperature reactions proceed between 298 and 411 K, and up to 5 g of metal is chlorinated in 1-3 h. Preliminary results indicate that the reactivity and exothermicity of the reaction between the Al and sulfur chloride reagents is highly dependent on the surface area-to-volume ratio of the metal and the volume of solvent. Elemental S is produced as a by-product during the chlorination with S2Cl2 but can be quantitatively rechlorinated under mild conditions to regenerate the initial chlorination reagent. Therefore, in this case, chlorine is the only element consumed in the reaction, thus minimizing the waste generated during the chlorination process. The AlCl3 may then be separated from other materials present in Al 6061 or Al 8001 because of its high solubility in the sulfur chloride reagents. This process may also be extended to chlorinate Al from research reactor fuels.