Loss of insulation vacuum tests on an EuXFEL cryomodule

被引：0
作者：
Barbanotti, S. [1 ]
Boeckmann, T. [1 ]
Bozhko, Y. [1 ]
Jensch, K. [1 ]
Klos, R. [1 ]
Ramalingam, R. [1 ]
Dhillon, A. K. [1 ]
Schnautz, T. [1 ]
Sellmann, D. [1 ]
机构：
[1] Deutsch Elektronen Synchrotron DESY, Notkestr 85, D-22607 Hamburg, Germany
来源：
ADVANCES IN CRYOGENIC ENGINEERING: PROCEEDINGS OF THE CRYOGENIC ENGINEERING CONFERENCE, CEC 2023 | 2024年 / 1301卷
关键词：
D O I：
10.1088/1757-899X/1301/1/012046
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Many Free Electron Lasers (FEL) are nowadays based on linear superconducting accelerators (linacs). The typical layout of such a linac consists of a number of cryomodules (CMs) arranged in strings. Each cryogenic circuit in a string is protected by safety valves (SVs) in case of failure of the system or a catastrophic event. A typical worst-case scenario considers the venting of the insulation vacuum, causing a fast and uncontrolled warm up of the cryogenic circuits. Such venting can for example take place across a pump port belonging to a string. The amount of heat deposited on each circuit is a very important parameter to correctly size the safety devices. This paper describes the tests performed at DESY on an EuXFEL cryomodule to evaluate the heat input to the three cryogenic circuits of the CM while venting the insulation vacuum. Test results are given with a particular focus of their application to long strings.
引用
收藏
页数：8
相关论文
共 50 条
  • [41] Experimental study on the storage performance of high-vacuum-multilayer-insulation tank after sudden, catastrophic loss of insulating vacuum
    G. F. Xie
    X. D. Li
    R. S. Wang
    Heat and Mass Transfer, 2012, 48 : 757 - 766
  • [42] VACUUM WEIGHT-LOSS AND CONTAMINATION TESTS OF SOME MATERIALS FOR SPACE APPLICATIONS
    POEHLMAN.HC
    VACUUM, 1968, 18 (03) : 164 - &
  • [43] INTERMEDIATE QUALITY CONTROL TESTS IN THE DEVELOPMENT OF A SUPERCONDUCTING RF CRYOMODULE FOR CW OPERATION
    Pattalwar, S.
    Jones, T.
    Strachan, J.
    Bate, R.
    Davis, P.
    McIntosh, P.
    ADVANCES IN CRYOGENIC ENGINEERING, VOLS 57A AND 57B, 2012, 1434 : 1583 - 1589
  • [44] SPECIFICATION AND DESIGN OF A 2 K HELIUM SYSTEM FOR CRYOMODULE AND CAVITY TESTS AT FRIB
    Waltz, C.
    Bricker, S.
    Compton, C.
    Fila, A.
    Johnson, M.
    Jones, S.
    Laumer, H.
    McCartney, A.
    Popielarski, J.
    Popielarski, L.
    Weisend, J. G., II
    Wlodarczak, J.
    Zeller, A.
    ADVANCES IN CRYOGENIC ENGINEERING, VOLS 57A AND 57B, 2012, 1434 : 1092 - 1099
  • [45] Analytical study of insulation characteristics of thermal batteries with vacuum insulation
    Kim C.-H.
    Choi J.-H.
    Park S.-Y.
    Lee H.-C.
    Lee S.-J.
    Kim G.
    Defect and Diffusion Forum, 2021, 412 : 141 - 147
  • [46] Insulation tests with crotin and anticrotin
    Fujiwara, K
    BIOCHEMISCHE ZEITSCHRIFT, 1923, 140 : 132 - 139
  • [47] Characterization of insulators for electric insulation in vacuum
    Damamme, G
    LeGressus, C
    ISDEIV - XVIITH INTERNATIONAL SYMPOSIUM ON DISCHARGES AND ELECTRICAL INSULATION IN VACUUM, PROCEEDINGS, VOLS I AND II, 1996, : 405 - 409
  • [48] Development of vacuum insulation panel systems
    Tao, WH
    Sung, WF
    Lin, JY
    JOURNAL OF CELLULAR PLASTICS, 1997, 33 (06) : 545 - &
  • [49] Vacuum insulation tandem accelerator for NCT
    Bayanov, B
    Belchenko, Y
    Belov, V
    Derevyankin, G
    Dimov, G
    Donin, A
    Dranichnikov, A
    Kononov, V
    Kononov, O
    Kraynov, G
    Krivenko, A
    Kuksanov, N
    Palchikov, V
    Petrichenkov, M
    Petrov, P
    Prudnikov, V
    Salimov, R
    Savkin, V
    Silvestrov, G
    Shirokov, V
    Sorokin, I
    Taskaev, S
    Tiunov, M
    RESEARCH AND DEVELOPMENT IN NEUTRON CAPTURE THERAPY, 2002, : 273 - 276
  • [50] The design of a die with a vacuum thermal insulation
    Baginski, A. G.
    Utyev, M.
    Kondratyeva, Y. M.
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2015 (MEACS2015), 2016, 124
12345