Statistical Evaluation of Effect of Shape Imperfections on Buckling Load of Carbon Fiber-Reinforced Plastic Thin-Walled Cylinders

被引：0
作者：
Bao, Jingxuan [1 ]
Takano, Atsushi [2 ]
Kitamura, Ryuta [2 ]
Masai, Takuma [3 ]
机构：
[1] Kanagawa Univ, Grad Sch Engn, 3-27-1 Rokkakubashi,Kanagawa Ku, Yokohama 2218686, Japan
[2] Kanagawa Univ, Dept Mech Engn, 3-27-1 Rokkakubashi,Kanagawa Ku, Yokohama 2218686, Japan
[3] Kanagawa Univ, Res Inst Engn, 3-27-1 Rokkakubashi,Kanagawa Ku, Yokohama 2218686, Japan
来源：
APPLIED SCIENCES-BASEL | 2025年 / 15卷 / 04期
关键词：
buckling; thin-walled cylinders; knockdown factor; COMPOSITE CYLINDERS; DESIGN; SHELLS;
D O I：
10.3390/app15042094
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Featured Application The carbon fiber-reinforced plastic thin-walled cylinders are lightweight and highly stiff, making them suitable for application in rocket s and aircraft fuselages.Abstract Thin-walled cylinders made from carbon fiber-reinforced plastic (CFRP) were measured using a laser displacement sensor and subjected to load tests. The effects of shape imperfections in the circumferential and axial directions, the radius-thickness ratio (r/t), and the offset compression loads on the knockdown factor (KDF), which is the ratio of the experimental and theoretical buckling loads, were investigated. A statistical evaluation of various trends relating to the KDF and the amplitudes of the shape imperfections was conducted. The buckling load test on the cylinders showed large deviations and scatter between theory and experiment. It is known that shape imperfections are one of the key factors affecting KDF. The shape imperfection induces a local stress concentration and/or local buckling, and they may induce premature buckling. We found a correlation between the KDF and shape imperfections in the circumferential and axial directions and r/t. The KDF did not have a simple correlation with the direction of offset compression loads, the direction of the maximum and minimum amplitude of local shape imperfections, or offset distance.
引用
收藏
页数：20
相关论文
共 29 条
  • [1] Batdorf S.B., A Simplified Method of Elastic-Stability Analysis for Thin Cylindrical Shells, (1947)
  • [2] Hilburger M.W., Nemeth M.P., Starnes J.H., Shell Buckling Design Criteria Based on Manufacturing Imperfection Signatures, AIAA J, 37, pp. 276-278, (1999)
  • [3] Kriegesmann B., Rolfes R., Huhne C., Tessmer J., Arbocz J., Probabilistic design of axially compressed composite cylinders with geometric and loading imperfections, Int. J. Struct. Stab. Dyn, 10, pp. 623-644, (2010)
  • [4] Wagner H.N.R., Huhne C., Niemann S., Khakimova R., Robust design criterion for axially loaded cylindrical shells—Simulation and Validation, Thin-Walled Struct, 115, pp. 154-162, (2017)
  • [5] Kim D.-Y., Sim C.-H., Park J.-S., Yoo J.-T., Yoon Y.-H., Lee K., Buckling Knockdown Factors of Composite Cylinders under Both Compression and Internal Pressure, Aerospace, 8, (2021)
  • [6] Zheng X., Zou Y., He B., Xiang J., Li Z., Yang Q., Buckling Analysis and Structure Improvement for the Afterburner Cylinder of an Aero-Engine, Aerospace, 10, (2023)
  • [7] Toda S., Buckling of cylinders with cutouts under axial compression, Exp. Mech, 23, pp. 414-417, (1983)
  • [8] Kobayashi S., Seko H., Koyama K., Compressive Buckling of CFRP Circular Cylindrical Shells Part I. Theoretical Analysis and Experiment, Aeronaut. Space Sci. Jpn, 32, pp. 111-121, (1984)
  • [9] Hirano Y., Optimization of Laminated Composite Cylindrical Shells for Axial Buckling, Aeronaut. Space Sci. Jpn, 32, pp. 46-51, (1984)
  • [10] Kasuya H., Uemura M., Coupling Effect on Axial Compressive Buckling of Laminated Composite Cylindrical Shells, Aeronaut. Space Sci. Jpn, 30, pp. 664-675, (1982)
123