Compression behavior of CFRP-confined recycled aggregate concrete under combined effects of sulfate corrosion and freeze-thaw cycles

被引:0
作者
Peng, Sheng [1 ,2 ]
Min, Tian-run [1 ]
Peng, Shuang [1 ]
Xie, Xian-qi [3 ,4 ]
Yao, Ying-kang [3 ,4 ]
Jia, Yong-sheng [3 ,4 ]
机构
[1] Wuhan Univ Sci & Technol, Inst High Performance Engn Struct, Wuhan 430065, Peoples R China
[2] Wuhan Univ, Sch Civil Engn, Wuhan 430000, Peoples R China
[3] Jianghan Univ, State Key Lab Precis Blasting, Wuhan 430056, Peoples R China
[4] Jianghan Univ, Hubei Key Lab Blasting Engn, Wuhan 430056, Peoples R China
关键词
Sulfate corrosion; Freeze-thaw cycles; RAC; CFRP reinforcement; Compressive behavior; STRESS-STRAIN MODEL; FRP; DURABILITY; STRENGTH; DESIGN; REINFORCEMENT; COLUMNS; FIBER;
D O I
10.1016/j.conbuildmat.2025.141064
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This study investigates the performance of recycled aggregate concrete (RAC) confined with carbon fiber reinforced polymer (CFRP) under the combined effect of sulfate corrosion and freeze-thaw cycles (FTCs), two major factors contributing to the durability deterioration of buildings and bridges. A multiscale analysis was performed to understand the damage mechanisms of RAC under the sulfate corrosion and FTCs effect. Compressive tests were conducted to evaluate the compressive mechanical properties, mechanical behavior and failure modes of CFRP-reinforced RAC. CFRP can significantly improve compressive strength from one layer to three layers with an increase of about 34 %, confirming the effectiveness of CFRP reinforcement. The FTCs from 50 to 150 times reduced residual compressive bearing strength by 7.6 %, while sulfate erosion had little effect on it with only a 3.4 % increase from 5d to 25d. As the RCA substitution increased from 0 % to 50 % and then to 100 %, the compressive strength decreased by 8.7 % and 15.6 %, respectively. These results demonstrate its potential for use in structural applications while maintaining acceptable performance levels. Additionally, developed models were proposed to predict failure strength, strain, and stress-strain response by incorporating a damage index and the effects of CFRP reinforcement. The results highlight the effectiveness of CFRP reinforcement in improving the mechanical properties and durability of RAC under severe environmental conditions. Furthermore, the proposed models provide an accurate prediction of the mechanical behavior of pre-damaged RAC reinforced with CFRP.
引用
收藏
页数:16
相关论文
共 69 条
  • [1] Aharonian F, 2020, Arxiv, DOI [arXiv:2010.06205, DOI 10.1016/J.POLY.2023]
  • [2] Prediction models for bond strength of steel reinforcement with consideration of corrosion
    Ahmadi, Masoud
    Kheyroddin, Ali
    Kioumarsi, Mahdi
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 5829 - 5834
  • [3] Innovative modeling techniques including MEP, ANN and FQ to forecast the compressive strength of geopolymer concrete modified with nanoparticles
    Ahmed, Hemn Unis
    Mohammed, Ahmed S. S.
    Faraj, Rabar H. H.
    Abdalla, Aso A. A.
    Qaidi, Shaker M. A.
    Sor, Nadhim Hamah
    Mohammed, Azad A. A.
    [J]. NEURAL COMPUTING & APPLICATIONS, 2023, 35 (17) : 12453 - 12479
  • [4] Compressive strength of geopolymer concrete modified with nano-silica: Experimental and modeling investigations
    Ahmed, Hemn Unis
    Mohammed, Ahmed S.
    Faraj, Rabar H.
    Qaidi, Shaker M. A.
    Mohammed, Azad A.
    [J]. CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 16
  • [5] Effects of the incorporation of recycled aggregate in the durability of the concrete submitted to freeze-thaw cycles
    Amorim Junior, N. S.
    Silva, G. A. O.
    Ribeiro, D. V.
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2018, 161 : 723 - 730
  • [6] Properties and applications of FRP in strengthening RC structures: A review
    Amran, Y. H. Mugahed
    Alyousef, Rayed
    Rashid, Raizal S. M.
    Alabduljabbar, Hisham
    Hung, C. -C.
    [J]. STRUCTURES, 2018, 16 : 208 - 238
  • [7] [Anonymous], 2013, Journal
  • [8] [Anonymous], 2013, Journal
  • [9] [Anonymous], 2011, Journal
  • [10] [Anonymous], 2019, Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature