Influence of Heat Treatment on Microstructure and Mechanical Properties of Laser Cladding Coatings

被引:0
作者
Yang, Chen [1 ]
Chen, Wenjing [1 ]
Tan, Bo [1 ]
Luo, Qingsong [1 ]
Cao, Tao [1 ]
Zhang, Zhenlin [2 ]
机构
[1] Xihua Univ, Sch Mat Sci & Engn, Chengdu 610039, Peoples R China
[2] Southwest Jiaotong Univ, Sch Mat Sci & Engn, Chengdu 610031, Peoples R China
基金
中国国家自然科学基金;
关键词
laser cladding; microstructure; heat treatment process; mechanical properties; COMPOSITE COATINGS;
D O I
10.3390/coatings14101251
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This study investigates the influence of various heat treatment processes on the microstructure and properties of laser cladding Fe314 coatings. The microstructure, phases, and impact fracture morphology of the cladding layer were observed using X-ray diffraction and scanning electron microscopy, among other methods. The hardness and impact performance of the cladding layer were also tested. The results indicated that there was compositional segregation and non-equilibrium microstructure in the untreated cladding layer, with an average microhardness of 368.67 HV and an impact toughness of 27 J, exhibiting quasi-cleavage fracture. The stress-relief annealing treatment resulted in a uniform distribution of M23C6 carbides inside the cladding layer. The pinning effect generated by M23C6 reduced the microhardness by 16.26% and increased the impact toughness to 54 J. The impact fracture surface exhibited ductile fracture. After secondary normalizing and annealing, the microstructure of the cladding layer transformed into a fine single-phase austenite structure, and fine M7C3 carbides precipitated at the grain boundaries. Under the effects of fine grain strengthening and dispersion strengthening, the microhardness of the cladding layer decreased by 38.14%, and the average impact absorbed energy of the specimen was 64 J, showing complete ductile fracture.
引用
收藏
页数:11
相关论文
共 30 条
  • [1] [Anonymous], 2009, Vickers Hardness Test Method for Metallic Materials
  • [2] [Anonymous], 2007, GB/T 229-2007
  • [3] Changyao O., 2023, Tribol. Int, V191, P109202
  • [4] Improved wear and corrosion resistance of laser-clad (Fe0.25Co0.25Ni0.25Cr0.125Mo0.125)86B14 coating through annealing treatment
    Chen, Bing
    Zhang, Guosong
    Zhang, Zongjia
    Wang, Zongyu
    Guo, Chunfen
    Song, Xiaojie
    [J]. SURFACE & COATINGS TECHNOLOGY, 2023, 473
  • [5] Microstructure and Wear Resistance of High-Chromium Cast Iron with Multicomponent Carbide Coating via Laser Cladding
    Chen, Chao
    Wang, Junfa
    Ge, Yiyuan
    Zhuang, Minghui
    Ma, Zheng
    [J]. COATINGS, 2023, 13 (08)
  • [6] Effect of ultrasonic vibration on quality and properties of laser cladding EA4T steel
    Chen Lin
    Chen Wen-jing
    Huang Qiang
    Xiong Zhong
    [J]. CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2019, 47 (05): : 79 - 85
  • [7] Microstructure and fatigue crack growth of EA4T steel in laser cladding remanufacturing
    Chen, WenJing
    Chen, Hui
    Li, CongChen
    Wang, Xiaoli
    Cai, Qing
    [J]. ENGINEERING FAILURE ANALYSIS, 2017, 79 : 120 - 129
  • [8] Microstructure and properties of Ti-Al-C composite coatings prepared by laser cladding
    Chu, Mengya
    Xiao, Huaqiang
    Ren, Lirong
    Mo, Taiqian
    Lin, Bo
    [J]. CERAMICS INTERNATIONAL, 2024, 50 (07) : 12498 - 12509
  • [9] Enhanced corrosion resistance of high speed laser- cladded Ni/316L alloy coating by heat treatment
    Dong, Hui
    Guo, Peng-Fei
    Han, Yan
    Bai, Ru-Xue
    Yang, Zi-Chen
    Zhang, San-Qi
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 952 - 962
  • [10] Effect of heat treatment on microstructure and mechanical properties of Fe60 coating by laser cladding on 304 stainless steel
    Du, Yanbin
    Peng, Yunchuan
    Liang, Qiang
    Li, Zhiqiang
    Tu, Jian
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 (2825-2834): : 2825 - 2834