Effect of 0.12wt%Sr Addition on Structural, Mechanical and Tribological Properties of Al-12Si+10wt%Zn Alloy

被引：0
|
作者：
Hekimoglu, Ali Pasa [1 ]
Zimitoglu, Sueha [1 ]
Haciosmanoglu, Murat [1 ]
机构：
[1] Recep Tayyip Erdogan Univ, Fac Engn & Architecture, Mech Engn Dept, Rize, Turkiye
来源：
INTERNATIONAL JOURNAL OF METALCASTING | 2025年
关键词：
Al-12Si-based alloy; microstructure; strength properties; friction; wear; DRY SLIDING WEAR; AL-SI-CU; HEAT-TREATMENT; EUTECTIC MODIFICATION; GRAIN-REFINEMENT; ALUMINUM-ALLOYS; AS-CAST; MICROSTRUCTURE; BEHAVIOR; FRICTION;
D O I：
10.1007/s40962-025-01564-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effects of 0.12wt%Sr additive on some material properties of Al-12Si+10wt%Zn alloy were examined in this study. Al-12Si+10wt%Zn and Al-12Si+10wt%Zn+0.12wt%Sr alloys were manufactured by permanent mold casting. Microstructures of these alloys were examined with both optic and scanning electron microscopes. Phases in the alloys were identified by energy-dispersive spectroscopy and X-ray diffraction analyses. Hardness measurements were performed with the Brinell method. Mechanical and tribological properties of the alloys were investigated with tensile and friction-wear tests, respectively. The microstructure of the Al-12Si+10wt%Zn alloy consists of alpha-Al, eutectic Al-Si mixture, primary Si and beta phases. Al-12Si+10wt%Zn+0.12wt%Sr alloy includes the Al-Zn-Fe-Si and Sr-Al-Si phases in addition to phases observed in the Al-12Si+10wt%Zn alloy. Sr addition resulted in the eutectic silicon particles becoming thinner and a spherical-like shape. The Sr addition to the Al-12Si+10wt%Zn alloy caused the hardness, yield strength and tensile strength to increase from 97 HBN to 138 HBN, 163 MPa to 233 MPa and 215 MPa to 240 MPa, respectively. The addition of Sr also caused coefficient of friction and wear volume of the Al-12Si-10Zn alloy to decrease from 0.5189 to 0.4621 and 4.488 mm3 to 4.025 mm3, respectively. Effects of Sr additive on the material properties of the Al-12Si+10wt%Zn alloy were discussed based on the microstructural changes.
引用
收藏
页数：13
相关论文
共 50 条
  • [21] Effect of Sr plus RE Combination Modifier on Microstructure and Mechanical Properties of Al-40 wt% Si Alloy
    Li, Xiaosong
    Hu, Wei
    Cai, Anhui
    Chen, Hua
    Zhou, Yong
    ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 : 1296 - 1300
  • [22] Effect of cooling rate and Mg addition on the structural evaluation of rapidly solidified Al-20wt%Cu-12wt%Fe alloy
    Karakose, Ercan
    Colak, Hakan
    MATERIALS CHARACTERIZATION, 2016, 121 : 68 - 75
  • [23] Effect of heat treatments on the microstructure and mechanical properties of Zn-15 wt% Al alloy
    Song, Zhenya
    Yan, Ming
    Jin, Shenchao
    Liu, Yong
    Ren, Yanbiao
    Shi, Tiesheng
    Zhang, Lincai
    MATERIALS RESEARCH EXPRESS, 2020, 7 (08)
  • [24] Effects of TiO2, CuO, and SiO2 nanoparticles addition on the microstructure and mechanical properties of Al-10 wt% Zn alloy
    AbdElRhiem, Eman
    Mostafa, M. M.
    Nada, R. H.
    Mohamed, S. G.
    Barakat, Y. F.
    Abdelaziz, Shereen M.
    PHYSICA SCRIPTA, 2023, 98 (06)
  • [25] Mechanical Properties, Thermal Properties and Microstructure of Heat-Treated Al-Zn-Mg-x%Cu (0.02 wt% Cu and 0.89 wt% Cu) Alloy
    Patel, Nikunj
    Pradhan, Ajaya Kumar
    INTERNATIONAL JOURNAL OF METALCASTING, 2024, 18 (04) : 3104 - 3114
  • [26] Effect of Multi Directional Forging on the Microstructure and Mechanical Properties of Zn-24 wt% Al-2 wt% Cu Alloy
    Sharath, P. C.
    Udupa, K. Rajendra
    Kumar, G. V. Preetham
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (01) : 89 - 96
  • [27] Effect of dendritic arm spacing on mechanical properties and corrosion resistance of Al 9 Wt Pct Si and Zn 27 Wt Pct Al alloys
    Osorio, Wislei R.
    Goulart, Pedro R.
    Santos, Givanildo A.
    Moura Neto, Carlos
    Garcia, Amauri
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (08): : 2525 - 2538
  • [28] Effect of CuO Nanostructure Addition and Cooling Rate on the Microstructure and Mechanical Characteristics of Hypoeutectic Al-2wt.%Si Alloy
    Abdelaziz, Shereen M.
    Fakher, Wafaa
    Nada, R. H.
    Ismail, A. M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [29] Effect of Sr addition on microstructure evolution and mechanical properties of Zn-4%Al hypoeutectic alloy
    Liu, Yang
    Geng, Cong
    Zhu, Yunke
    Chen, Xu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 695 : 443 - 451
  • [30] Effect of Grain Modifier on Mechanical and Tribological Properties of Al-Si Alloy and Composite
    Radhika, N.
    Sasikumar, J.
    Jojith, R.
    SILICON, 2021, 13 (03) : 841 - 855
12345