Diffusion resistance behavior of W between MoSi2 coating and C103 alloy

被引:0
|
作者
Wu, Wenxing [1 ,2 ,3 ]
Wu, Jianhang [1 ,2 ,3 ]
Sun, Anying [1 ,2 ,3 ]
Zhu, Jianyang [1 ,2 ,3 ]
Tang, Hongqun [1 ,2 ,3 ]
Shen, Fang [1 ]
Lei, Shengyuan [1 ,2 ,3 ]
机构
[1] Guangxi Univ, Guangxi Key Lab Petrochem Resource Proc & Proc Int, Sch Chem & Chem Engn, Sch Resources Environm & Mat, Nanning 530004, Guangxi, Peoples R China
[2] Guangxi Univ, Educ Dept Guangxi Zhuang Autonomous Reg, Key Lab High Performance Struct Mat & Thermo Surfa, Nanning 530004, Peoples R China
[3] Guangxi Univ, State Key Lab Featured Met Mat & Life Cycle Safety, Nanning 530004, Guangxi, Peoples R China
关键词
MoSi; 2; coating; C103; alloy; Diffusion barrier; Electronegativity; W; OXIDATION; INTERDIFFUSION; W5SI3;
D O I
10.1016/j.ijrmhm.2025.107076
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
MoSi2/W composite coatings were prepared on C103 alloy by sol-gel (SG) and spark plasma sintering (SPS) processes. After oxidation at 1550 degrees C for 100 h, the generation of volume expansion could fill the tiny pores in the W diffusion barrier layer. The diffusion growth rate of MoSi2/W coating was 109.76 mu m2/h, which is only 56 % of that of MoSi2 coating. This was attributed to the fact that the diffusion barrier of Si atoms in W (0.383 eV) was higher than that in Nb (0.022 eV), and there was a significant difference in electronegativity between Si-W (0.212) and Si-Nb (0.090).
引用
收藏
页数:9
相关论文
共 50 条
  • [31] Formation of MoSi2 and Al doped MoSi2 coatings on molybdenum base TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy
    Majumdar, S.
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (15) : 3393 - 3398
  • [32] Influence of MoSi2 content in suspension on the phase, microstructure and properties of hydrothermal electrophoretic deposited SiCn-MoSi2 coating for SiC pre-coated C/C composites
    Wang, Bo
    Huang, Jian-Feng
    Liu, Miao
    Cao, Li-Yun
    RESEARCH ON CHEMICAL INTERMEDIATES, 2011, 37 (2-5) : 359 - 367
  • [33] Study on the diffusion barrier effect of WSi2 layer at the MoSi2/Nb-Ti-Si based alloy interface
    Yue, Gao
    Guo, Xiping
    Qiao, Yanqiang
    CORROSION SCIENCE, 2020, 163 (163)
  • [34] Thermal fatigue behavior of C/C composites modified by SiC-MoSi2-CrSi2 coating
    Chu, Yanhui
    Fu, Qiangang
    Li, Hejun
    Li, Kezhi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (31) : 8111 - 8115
  • [35] Oxidation Resistance of the ZrSi2–MoSi2–ZrB2–ZrC Coating on the C/C–SiC Composite in High-Speed High-Enthalpy Air Plasma Flow
    A. N. Astapov
    B. E. Zhestkov
    V. A. Pogodin
    I. V. Sukmanov
    Russian Metallurgy (Metally), 2023, 2023 : 1921 - 1930
  • [36] In-situ synthesis of MoSi2 coating on Mo substrate under carbon protection and its short-term oxidation behavior
    Yang, Ke-Ming
    Wang, Jun-Xia
    Yang, Shi-Yuan
    Zhang, Xiu-Lu
    Luo, Ping
    SURFACE & COATINGS TECHNOLOGY, 2018, 354 : 324 - 329
  • [37] Microstructure evolution and oxidation behavior of B modified MoSi2 coating on Nb-Si based alloys
    Pang, Jie
    Wang, Wan
    Zhou, Chungen
    CORROSION SCIENCE, 2016, 105 : 1 - 7
  • [38] Excellent oxidation resistance: A dense and well-bonded MoSi2/(Nb,X)Si2 composite coating on Nb-Si based alloy
    Zhang, Weiping
    Qiao, Yanqiang
    Guo, Xiping
    Li, Longfei
    Nan, Xi
    CORROSION SCIENCE, 2025, 249
  • [39] Improving oxidation resistance of TZM alloy by deposited Si-MoSi2 composite coating with high silicon concentration
    Zhang, Yingyi
    Fu, Tao
    Yu, Laihao
    Shen, Fuqiang
    Wang, Jie
    Cui, Kunkun
    CERAMICS INTERNATIONAL, 2022, 48 (14) : 20895 - 20904
  • [40] FORMATION OF BILAYER SHALLOW MOSI2/COSI2 SALICIDE CONTACT USING W/CO-MO ALLOY METALLIZATION
    YANG, FM
    CHEN, MC
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1992, 31 (04): : 1004 - 1011