Influence of the cryogenic treatment on wear resistance and cutting performance of cemented carbide

被引：2

作者：

Gao, Yuan ^{[1
]}

Wang, Yongguo ^{[1
]}

Chen, Zhi ^{[2
]}

Liu, Lin ^{[3
]}

Zhang, Yongqiang ^{[3
]}

Jia, Shengjun ^{[3
]}

Yang, Peihui ^{[3
]}

机构：

[1] Shanghai Univ, Sch Mechatron Engn & Automat, Shanghai 200444, Peoples R China

[2] Taiyuan Univ Sci & Technol, Sch Mech Engn, Taiyuan 030000, Peoples R China

[3] Xian Space Engine Co Ltd, Xian 710000, Peoples R China

来源：

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2025年 / 128卷

关键词：

Cryogenic treatment; Cemented carbide; Cutting performance; Wear resistance; MICROSTRUCTURE; MORPHOLOGY; (W; V)C-X; INSERTS;

D O I：

10.1016/j.ijrmhm.2025.107042

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In order to improve the cutting performance of cemented carbide tools with large cutting depth, the submicrongrained WC-6wt%Co cemented carbide was cryogenically treated with liquid nitrogen, and its residual stress, dry friction and wear behavior and cutting performance were studied. The results show that after cryogenic treatment, the residual compressive stress of the WC phase increases by 276 %, and the phase transformation driving force of the Co phase is generated, promoting the transformation from alpha-Co to epsilon-Co. During dry friction and wear, the wear resistance of the material increased by 88 %. With coolant, the cutting depth was 7 mm, and the cutting performance of the tool improved by 97.56 % during continuous turning of the superalloy.

引用

页数：14

共 41 条

[1] Optimization of Cutting Parameters Affecting Surface Roughness in Turning of Inconel 625 Superalloy by Cryogenically Treated Tungsten Carbide Inserts [J].

Akgun, Mahir ;

Demir, Halil .

SN APPLIED SCIENCES, 2021, 3 (02)

[2]

[Anonymous], 2016, JB/T 12615

[3] Kinetics of the allotropic hcp-fcc phase transformation in cobalt [J].

Bauer, Rico ;

Jaegle, Eric A. ;

Baumann, Wolfgang ;

Mittemeijer, Eric Jan .

PHILOSOPHICAL MAGAZINE, 2011, 91 (03) :437-457

[4] Comparison between cryogenic coolants effect on tool wear and surface integrity in finishing turning of Inconel 718 [J].

Chaabani, S. ;

Arrazola, P. J. ;

Ayed, Y. ;

Madariaga, A. ;

Tidu, A. ;

Germain, G. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 285

[5] Impact of cryogenic treatment on the performance of coated tungsten carbide inserts during machining of EN24 grade alloy steel [J].

Chand, R. Prem ;

Reddy, T. V. Sreerama ;

Anjinappa, Chandrashekar ;

Omprakash, B. ;

Razak, Abdul ;

Wodajo, Anteneh Wogasso .

ENGINEERING REPORTS, 2024, 6 (09)

[6] Microstructural and Tribological Characterization of Cryogenic Treated WC-Co Cutting Bits under Different Holding Times for Rock Cutting Applications [J].

Chinnasamy, Moganapriya ;

Rathanasamy, Rajasekar ;

Palaniappan, Sathish Kumar ;

Pal, Samir Kumar ;

Muthuswamy, Padmakumar ;

Korrayi, Roja Rani ;

Uddin, Md. Elias .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (10) :4933-4950

[7] Microstructural transformation analysis of cryogenic treated conical rock cutting bits for mining applications [J].

Chinnasamy, Moganapriya ;

Rathanasamy, Rajasekar ;

Palaniappan, Sathish Kumar ;

Pal, Samir Kumar .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 110

[8] An experimental investigations on effects of cooling/lubrication conditions in micro milling of additively manufactured Inconel 718 [J].

Danish, Mohd ;

Aslantas, Kubilay ;

Hascelik, Ahmet ;

Rubaiee, Saeed ;

Gupta, Munish Kumar ;

Yildirim, Mehmet Bayram ;

Ahmed, Anas ;

Bin Mahfouz, Abdullah .

TRIBOLOGY INTERNATIONAL, 2022, 173

[9] Recent developments in the new generation of hard coatings applied on cemented carbide cutting tools [J].

Derakhshandeh, M. R. ;

Eshraghi, M. J. ;

Razavi, M. .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 111

[10] Experimental results on the performance of cryogenic treatment of tool and minimum quantity lubrication for machinability improvement in the turning of Inconel 718 [J].

Deshpande, Yogesh V. ;

Andhare, Atul B. ;

Padole, Pramod M. .

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (01) :1-21

← 1 2 3 4 5 →