Laser powder bed fusion of mixed aluminum powders: Microstructure features and mechanical properties

被引：0
|
作者：
Rogachev, S. O. [1 ]
Fedorenko, L. V. [1 ]
Naumova, E. A. [1 ]
Tabachkova, N. Yu. [1 ]
Bazhenov, V. E. [1 ]
Chernyshikhin, S. V. [1 ]
机构：
[1] Natl Univ Sci & Technol MISiS, Moscow, Russia
来源：
MATERIALS LETTERS | 2025年 / 389卷
基金：
俄罗斯科学基金会;
关键词：
Aluminum alloy; Metal powders; Laser powder bed fusion; Microstructure; Mechanical properties; BOUNDARY WETTING TRANSITION;
D O I：
10.1016/j.matlet.2025.138404
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aluminum alloy was synthesized by the LBBF method from a mixture of different secondary aluminum powders containing Mg, Zn, Fe, Ce, Si, Co and Ni alloying elements with their total amount of about 6 wt%. The annealing treatment of the alloy at 200 degrees C relieved high internal stress, which allowed to achieve an excellent combination of strength and plasticity. Depending on the scanning speed, the tensile strength and relative elongation varied from 266 to 324 MPa and from 16 to 19 %, respectively. Such properties were the result of the ultra-fine cellular microstructure formation, with the cell boundaries formed by chains of nanosized aluminide particles. Detailed studies of the heterogeneity of the microstructure and its morphology were carried out. High thermal stability of the synthesized material was established.
引用
收藏
页数：5
相关论文
共 50 条
  • [21] Microstructure and mechanical properties of Al10SiMg fabricated by pulsed laser powder bed fusion
    Chou, R.
    Ghosh, A.
    Chou, S. C.
    Paliwal, M.
    Brochu, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 689 : 53 - 62
  • [22] Microstructure and mechanical properties of difficult to weld Rene 77 superalloy produced by laser powder bed fusion
    Atabay, Sila Ece
    Sanchez-Mata, Oscar
    Muniz-Lerma, Jose Alberto
    Brochu, Mathieu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 827
  • [23] Effects of increasing powder layer thickness on the microstructure, mechanical properties, and failure mechanism of IN718 superalloy fabricated by laser powder bed fusion
    Mohsen Badrossamay
    Ali Rezaei
    Ehsan Foroozmehr
    Ali Maleki
    Ali Foroozmehr
    The International Journal of Advanced Manufacturing Technology, 2022, 118 : 1703 - 1717
  • [24] Effects of increasing powder layer thickness on the microstructure, mechanical properties, and failure mechanism of IN718 superalloy fabricated by laser powder bed fusion
    Badrossamay, Mohsen
    Rezaei, Ali
    Foroozmehr, Ehsan
    Maleki, Ali
    Foroozmehr, Ali
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 118 (5-6): : 1703 - 1717
  • [25] Improving the microstructure and mechanical properties of laser powder bed fusion-fabricated tantalum by high laser energy density
    Du, Jingguang
    Ren, Yaojia
    Zhang, Mingming
    Liang, Luxin
    Chen, Chao
    Zhou, Kechao
    Liu, Xinyan
    Xu, Feng
    Baker, Ian
    Wu, Hong
    MATERIALS LETTERS, 2023, 333
  • [26] Laser power modulated microstructure evolution, phase transformation and mechanical properties in NiTi fabricated by laser powder bed fusion
    Chen, Wenliang
    Yang, Qin
    Huang, Shuke
    Huang, Shiyang
    Kruzic, Jamie J.
    Li, Xiaopeng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 861 (861)
  • [27] Effect of solution treatment on microstructure and mechanical properties of AZ91D alloy fabricated by laser powder bed fusion
    Xu W.-H.
    Zhang Z.-W.
    Li J.-K.
    Yuan H.-W.
    An G.-J.
    Shi H.
    Li W.
    Wei Q.-S.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2023, 33 (11): : 3638 - 3649
  • [28] Laser Powder Bed Fusion of Powder Material: A Review
    Zhao, Xi
    Wang, Tong
    3D PRINTING AND ADDITIVE MANUFACTURING, 2023, 10 (06) : 1439 - 1454
  • [29] Microstructure and mechanical properties of Al-Zn-Mg-Cu-Er-Zr alloy processed by laser powder bed fusion
    Pei, Yu
    Wei, Wu
    Hu, Jifei
    Bi, Jianlei
    Gao, Kunyuan
    Wen, Shengping
    Wu, Xiaolan
    Huang, Hui
    Nie, Zuoren
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 35 : 4164 - 4174
  • [30] Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion
    Sanchez-Mata, O.
    Muniz-Lerma, J. A.
    Wang, X.
    Atabay, S. E.
    Shandiz, M. Attarian
    Brochu, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 780 (780):
12345