Physio-Mechanical Characterization of Recycled Polyethylene Terephthalate and Soda-Lime Glass Waste Composite for Roof Tile Application

被引:0
作者
Busari, Yusuf Olanrewaju [1 ,2 ,3 ]
Ibrahim, Issah Sadiq [1 ]
Ajao, Kabir S. [1 ]
Abbas, Norliana Mohd [2 ,3 ]
Adegbola, James Obafemi [1 ]
Ibrahim, Hassan Kobe [4 ]
Reghioua, Abdallah [5 ]
Shuaib-Babata, Yusuf Lanre [1 ]
Idowu, Rachael Oluwatoyosi [1 ]
机构
[1] Univ Ilorin, Dept Mat & Met Engn, Ilorin 234031, Nigeria
[2] Univ Teknol MARA Malaysia UiTM, Smart Mfg Res Inst, Shah Alam 40450, Malaysia
[3] Univ Teknol MARA UiTM, Sch Mech Engn, Shah Alam 40450, Malaysia
[4] Univ Ilorin, Dept Mech Engn, Ilorin 234031, Nigeria
[5] Univ El Oued, Fac Technol, Lab Appl Chem & Environm, El Oued 39000, Algeria
来源
JOURNAL OF POLYMER MATERIALS | 2024年 / 41卷 / 03期
关键词
Polyethylene terephthalate (PET); soda-lime glass; physical; mechanical properties; roof tile; THERMAL-PROPERTIES;
D O I
10.32604/jpm.2024.055895
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The research paper focuses on manufacturing composite materials from waste polyethylene terephthalate (PET) reinforced with soda-lime glass to provide a lightweight, less brittle, and high rust resistance when exposed to hazardous environment. In developing nations such as Nigeria, there is a significant surge in the volume of bottled water and other packaging materials used in households, leading to a rapid accumulation of biodegradable waste, that presents concerns such as the creation of landfills and health issues. PET are thermoplastic polymer that can be melted and shaped into various objects. This study involves the incorporation of soda lime glass with recycled PET with various weight proportions to create a composite for roof tile application. The processing phases encompass the gathering of discarded PET and glass, purification, fragmentation, glass treatment, composite fabrication, and physio-mechanical and microstructural characterization. The utilization of soda lime glass in the recycling of plastics led to the creation of cost-effective and efficient roof tile composites, while also decreasing environmental pollution. The density of the composite tile varied between 1.000242-1.600259 g/cm3 with 20 wt.% filler having the lowest density. The water absorption ranged from 0.12%-0.79%. Mechanical characterization results revealed that the hardness and tensile strength increased with increasing wt.% of reinforcement (soda-lime glass) with the highest values being 271 HBN and 12 N/mm2 (peak) at 60 and 50 wt.% filler (soda-lime glass), respectively. The composite samples had similar impact strength which varied between 70-74 J. Fourier Transform Infrared (FTIR) analysis reveals the occurrence of chemical and mechanical improvement during the recycling process. The composites exhibited promising properties from the research and revealed that the addition of the reinforcement largely improves the properties.
引用
收藏
页码:117 / 129
页数:13
相关论文
共 43 条
  • [1] Bagasse filled recycled polyethylene bio-composites: Morphological and mechanical properties study
    Agunsoye, J. O.
    Aigbodion, V. S.
    [J]. RESULTS IN PHYSICS, 2013, 3 : 187 - 194
  • [2] Agunsoye JO., 2018, J RES PHYS, V39, P35, DOI [10.2478/jrp20180004, DOI 10.2478/JRP-2018-0004]
  • [3] Effects of injection molding parameters on cellular structure of roofing tiles composite
    Ahmad, Mumtaz
    Waseem, Mohammad
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 36 : 701 - 707
  • [4] Akinwande A. A., 2021, IOP Conference Series: Materials Science and Engineering, V1107, DOI 10.1088/1757-899X/1107/1/012022
  • [5] Recycled soda lime silica glass inclusion in polytetrafluoroethylene matrix as reinforcement for microwave substrate applicationRecycelte Natronkalk-Silicium-Glas-Einschlusse in Polytetrafluorehtylen als Verstarkung fur Mikrowellensubstratanwendungen
    Alhaji, I. A.
    Abbas, Z.
    Zainuddin, N.
    Ibrahim, N. A.
    Khamis, A. M.
    Lakin, I. I.
    [J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2022, 53 (11) : 1373 - 1385
  • [6] Utilization of Polymer Concrete Composites for a Circular Economy: A Comparative Review for Assessment of Recycling and Waste Utilization
    Alhazmi, Hatem
    Shah, Syyed Adnan Raheel
    Anwar, Muhammad Kashif
    Raza, Ali
    Ullah, Muhammad Kaleem
    Iqbal, Fahad
    [J]. POLYMERS, 2021, 13 (13)
  • [7] Recycling of industrial wastes in ceramic manufacturing: State of art and glass case studies
    Andreola, Fernanda
    Barbieri, Luisa
    Lancellotti, Isabella
    Leonelli, Cristina
    Manfredini, Tiziano
    [J]. CERAMICS INTERNATIONAL, 2016, 42 (12) : 13333 - 13338
  • [8] [Anonymous], 2022, ASTM D570-22
  • [9] Bamigboye G. O., 2019, Journal of Physics: Conference Series, V1378, DOI 10.1088/1742-6596/1378/4/042105
  • [10] Sustainable use of seashells as binder in concrete production: Prospect and challenges
    Bamigboye, Gideon O.
    Nworgu, Austin T.
    Odetoyan, Abimbola O.
    Kareem, Mutiu
    Enabulele, David O.
    Bassey, Daniel E.
    [J]. JOURNAL OF BUILDING ENGINEERING, 2021, 34