Composition-dependent ferroelectric behavior in Zn1-xMgxO thin films

We report on ferroelectric behavior in wurtzite Zn1-xMgxO thin films across the accessible Mg concentration range. We outline a sputter deposition process for Zn1-xMgxO thin films using an oxygen/ozone environment to reduce electronic defects that limit insulation resistance. This procedure yields films that support ferroelectric hysteresis in Mg-substitution concentrations between similar to 8 mol% and 55 mol%. Generally, the remnant polarization has a modest composition dependence and all films show complete ferroelectric wakeup. Coercive fields initially fall with increasing Mg fraction and then increase above similar to 13 mol%. The initial reduction is likely associated with structural softening via Mg substitution while the increase is likely associated with increased crystallographic disorder. The most resistive films reside in the 25-38 mol% Mg window. Electron microscopy reveals large stacking fault concentrations in as-deposited film microstructures consistent with sputtered ZnO. Chemical analysis suggests uniform Mg distribution in all films. For the test case in the Mg-rich regime, films become less resistive with decreasing thickness, but hysteresis is observable in a 66 nm layer.