EVALUATION OF ELECTRON PROPERTIES OF ADDITIVELY MANUFACTURED AND CONVENTIONAL ALUMINIUM ALLOYS

被引：0
|
作者：
Vandzura, Radoslav [1 ]
Gelatko, Matus [1 ]
Hatala, Michal [1 ]
Botko, Frantisek [1 ]
Radchenko, Svetlana [1 ]
机构：
[1] Tech Univ Kosice, Fac Mfg Technol Seat Presov, Bayerova 1, Presov 08101, Slovakia
来源：
MM SCIENCE JOURNAL | 2024年 / 2024卷
关键词：
electron beam welding; additive manufacturing; AlSi10Mg; AW-5754;
D O I：
10.17973/MMSJ.2024_12_2024112
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Presented paper is focused on the experimental welding of aluminium alloys - the additively manufactured material AlSi10Mg and the conventional alloy AW-5754. The experimental electron beam welding was conducted in collaboration with First welding company, Inc. The objective of the experiment was to create a weld joint between aluminium alloys prepared by additive and conventional methods, evaluate the base materials, the heat-affected zones (HAZ), and the weld joint in terms of microstructure, as well as measure and assess microhardness.
引用
收藏
页码：8061 / 8065
页数：5
相关论文
共 50 条
  • [21] Tensile Properties of Additively Manufactured C-18150 Copper Alloys
    Congyuan Zeng
    Hao Wen
    Benjamin C. Bernard
    Huan Ding
    Jonathan R. Raush
    Paul R. Gradl
    Michael Khonsari
    Shengmin Guo
    Metals and Materials International, 2022, 28 : 168 - 180
  • [22] Tensile Properties of Additively Manufactured C-18150 Copper Alloys
    Zeng, Congyuan
    Wen, Hao
    Bernard, Benjamin C.
    Ding, Huan
    Raush, Jonathan R.
    Gradl, Paul R.
    Khonsari, Michael
    Guo, Shengmin
    METALS AND MATERIALS INTERNATIONAL, 2022, 28 (01) : 168 - 180
  • [23] Oxidation Properties of Additively Manufactured High Entropy Alloys: A Short Review
    Lee, Jhuo-Lun
    Yeh, An-Chou
    Murakami, Hideyuki
    HIGH TEMPERATURE CORROSION OF MATERIALS, 2024, 101 (06) : 1369 - 1379
  • [24] A micropillar compression investigation into the plastic flow properties of additively manufactured alloys
    Li, Shi-Hao
    Zhao, Yakai
    Radhakrishnan, Jayaraj
    Ramamurty, Upadrasta
    ACTA MATERIALIA, 2022, 240
  • [25] Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: a review
    Prveen Bidare
    Amaia Jiménez
    Hany Hassanin
    Khamis Essa
    Advances in Manufacturing, 2022, 10 : 175 - 204
  • [26] A comparative investigation on the microstructure and mechanical properties of additively manufactured aluminum alloys
    Muhammad, Muztahid
    Nezhadfar, P. D.
    Thompson, Spencer
    Saharan, Ankit
    Phan, Nam
    Shamsaei, Nima
    INTERNATIONAL JOURNAL OF FATIGUE, 2021, 146
  • [27] Microstructure and properties of additively manufactured Al-Ce-Mg alloys
    Sisco, K.
    Plotkowski, A.
    Yang, Y.
    Leonard, D.
    Stump, B.
    Nandwana, P.
    Dehoff, R. R.
    Babu, S. S.
    SCIENTIFIC REPORTS, 2021, 11 (01)
  • [28] Microstructural characterization and mechanical properties of additively manufactured molybdenum and molybdenum alloys
    Oehlerking, Faith
    Stawovy, Michael T.
    Ohm, Scott
    Imandoust, Aidin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, 109
  • [29] Multiscale fatigue assessment of wire arc additively manufactured aluminium alloys with experimental and simulation approach
    Safyari, Mahdieh
    Moshtaghi, Masoud
    WELDING IN THE WORLD, 2025,
  • [30] Conventional and Additively Manufactured Stainless Steels: A Review
    J. R. Jessy Michla
    Rajini Nagarajan
    Senthilkumar Krishnasamy
    Suchart Siengchin
    Sikiru Oluwarotimi Ismail
    T. Ram Prabhu
    Transactions of the Indian Institute of Metals, 2021, 74 : 1261 - 1278
12345