Microstructure, Mechanical Properties at Room Temperature and High Temperature of Near-α Titanium Alloys Fabricated by Spark Plasma Sintering

被引:0
作者
Wang, Qiang [1 ]
Zhang, Zhaohui [1 ,2 ]
Jia, Xiaotong [1 ]
He, Yangyu [1 ]
Zhou, Jinzhao [1 ]
Sun, Yuanhao [1 ]
Cheng, Xingwang [1 ,2 ]
机构
[1] Beijing Inst Technol, Sch Mat Sci & Engn, Beijing 100081, Peoples R China
[2] Tangshan Res Inst BIT, Tangshan Key Lab High Performance Met & Ceram, Tangshan 063000, Peoples R China
关键词
near-alpha titanium alloys; spark plasma sintering; sintering temperature; microstructure; mechanical property; EVOLUTION;
D O I
10.3390/nano15040293
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
A near-alpha titanium alloy was fabricated using spark plasma sintering (SPS) to investigate the effects of sintering temperature on its relative density, microstructure, and mechanical properties. The relative density increased significantly with temperature, reaching 94.56%, 99.91%, and 99.99% at 850 degrees C, 900 degrees C, and 1000 degrees C, respectively. At 850 degrees C, the alloy contained numerous pores, leading to low density, while at 900 degrees C, full densification was achieved, resulting in a bimodal microstructure comprising 20% primary alpha phase (average size: 2.74 mu m) and 80% transformed beta phase (average lamellar width: 0.88 mu m). Nanoscale equiaxed alpha phase (375 nm) and dispersed nanoscale beta phase (80 nm) were observed within the lamellar structure. A distinct L-phase interfacial layer (50-100 nm) was identified at the alpha/beta interfaces with a specific orientation relationship. At 1000 degrees C, the microstructure transformed into a fully lamellar structure with wider lamellae (1.99 mu m), but mechanical properties declined due to coarsening. The alloy sintered at 900 degrees C exhibited the best properties, with a tensile strength of 989 +/- 10 MPa at room temperature and 632 +/- 10 MPa at 600 degrees C, along with elongations of 9.2 +/- 0.5% and 13.0 +/- 0.5%, respectively. These results highlight the importance of optimizing sintering temperature to balance densification and microstructural refinement for enhanced mechanical performance.
引用
收藏
页数:13
相关论文
共 28 条
[1]   Development and characterization of a novel Y-Ti-O based aluminum nano-composite processed by high energy ball-milling and spark plasma sintering [J].
Borse, Manish N. ;
Manokaran, M. ;
Yebaji, Sushil G. ;
Chopra, Swamini ;
Sourav, Ayush ;
Majumdar, Bhaskar ;
Babu, Arvindha ;
Thangaraju, Shanmugasundaram .
MATERIALS CHARACTERIZATION, 2022, 190
[2]   Fatigue life prediction of Ti60 titanium alloy under very high cycle loading at different temperatures [J].
Chen, Chao -Lin ;
Shang, De-Guang ;
Xiao, Na-Min ;
Li, Xing -Wu ;
Sha, Ai-Xue ;
Li, Jing ;
Li, Jing-Xuan ;
Tang, Zhi-Qiang ;
Han, Zhao-Yun ;
Guo, Yi-Er ;
Li, Dao-Hang .
INTERNATIONAL JOURNAL OF FATIGUE, 2023, 176
[3]   Study of Bulk Amorphous and Nanocrystalline Alloys Fabricated by High-Sphericity Fe84Si7B5C2Cr2 Amorphous Powders at Different Spark-Plasma-Sintering Temperatures [J].
Dong, Yannan ;
Liu, Jiaqi ;
Wang, Pu ;
Zhao, Huan ;
Pang, Jing ;
Li, Xiaoyu ;
Zhang, Jiaquan .
MATERIALS, 2022, 15 (03)
[4]   Titanium metal matrix composites: An overview [J].
Hayat, Muhammad D. ;
Singh, Harshpreet ;
He, Zhen ;
Cao, Peng .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 121 :418-438
[5]   A review of multi-physical fields induced phenomena and effects in spark plasma sintering: Fundamentals and applications [J].
Hu, Zheng-Yang ;
Zhang, Zhao-Hui ;
Cheng, Xing-Wang ;
Wang, Fu-Chi ;
Zhang, Yi-Fan ;
Li, Sheng-Lin .
MATERIALS & DESIGN, 2020, 191
[6]   Multiscale Architecture and Superior High-Temperature Performance of Discontinuously Reinforced Titanium Matrix Composites [J].
Huang, Lujun ;
An, Qi ;
Geng, Lin ;
Wang, Shuai ;
Jiang, Shan ;
Cui, Xiping ;
Zhang, Rui ;
Sun, Fengbo ;
Jiao, Yang ;
Chen, Xin ;
Wang, Cunyu .
ADVANCED MATERIALS, 2021, 33 (06)
[7]   Fabrication of nano-grained Ti-Nb-Zr biomaterials using spark plasma sintering [J].
Hussein, M. A. ;
Suryanarayana, C. ;
Al-Aqeeli, N. .
MATERIALS & DESIGN, 2015, 87 :693-700
[8]   The analysis of fracture toughness and fracture mechanism of Ti60 alloy under different temperatures [J].
Jia, Runchen ;
Zeng, Weidong ;
He, Shengtong ;
Gao, Xiongxiong ;
Xu, Jianwei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 810
[9]   Bimorphic microstructure in Ti-6Al-4V alloy manipulated by spark plasma sintering and in-situ press forging [J].
Kang, L. M. ;
Cai, Y. J. ;
Luo, X. C. ;
Li, Z. J. ;
Liu, X. B. ;
Wang, Z. ;
Li, Y. Y. ;
Yang, C. .
SCRIPTA MATERIALIA, 2021, 193 :43-48
[10]   Tooling in Spark Plasma Sintering Technology: Design, Optimization, and Application [J].
Laptev, Alexander M. ;
Bram, Martin ;
Garbiec, Dariusz ;
Raethel, Jan ;
van der Laan, Antoine ;
Beynet, Yannick ;
Huber, Jens ;
Kuester, Matthias ;
Cologna, Marco ;
Guillon, Olivier .
ADVANCED ENGINEERING MATERIALS, 2024, 26 (05)