Seismic response and design of base-isolated hillside stilted structures

被引:0
作者
Li, Ruifeng [1 ]
Liu, Liping [1 ]
Lei, Haiming [1 ]
Li, Yingmin [1 ]
机构
[1] Chongqing Univ, Sch Civil Engn, Chongqing, Peoples R China
来源
JOURNAL OF BUILDING ENGINEERING | 2025年 / 103卷
基金
美国国家科学基金会;
关键词
Seismic response; Direct displacement-based seismic design; Hillside stilted structures; Base isolation; Shaking table tests; BUILDINGS;
D O I
10.1016/j.jobe.2025.112217
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Established studies and seismic site investigations have revealed that hillside stilted structures suffer more serious damage compared with ordinary structures on flat ground due to their stiffness irregularities. However, studies on mitigating stiffness irregularities and enhancing seismic performance of stilted structures are limited. In this study, isolation bearings are introduced for the first time into the base of stilted columns, forming a base-isolated stilted structure, with the aim of controlling structural seismic response and mitigating stiffness irregularities. A series of shaking table tests were conducted on both a base-isolated stilted frame and a fixed-base stilted frame. Then, the stiffness of a stilted column-bearing tandem system was analyzed to determine the deformation of stilted columns under uniform stiffness distribution conditions. Finally, a direct displacement-based seismic design method for base-isolated stilted frames was proposed, and its validity was verified through time history analysis of 7-storey and 3-storey stilted building design cases. Test results demonstrated that installing seismic isolation bearings at the base of the stilted columns effectively reduced the seismic response of the stilted structure, verifying the effectiveness of the bearing arrangement. The results of the time-history analysis closely match the design values, and the errors in floor shear, displacement, and bearing deformation remain within 10 %, confirming the validity of the design method. Moreover, the difference in shear force among stilted columns of different lengths remains less than 10 %, indicating that using the proposed design method effectively achieves the objective of mitigating stiffness irregularities.
引用
收藏
页数:18
相关论文
共 46 条
  • [1] Seismic vulnerability assessment of step-back hill buildings through experimental investigation, numerical simulation and fragility estimation
    Acharya, Vedatrayee
    Sengupta, Piyali
    [J]. BULLETIN OF EARTHQUAKE ENGINEERING, 2024, 22 (02) : 395 - 434
  • [2] Seismic performance evaluation of reinforced concrete hilly buildings under sequence of earthquakes
    Aggarwal, Yati
    Kulariya, Mahipal
    Saha, Sandip Kumar
    [J]. STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 2024, 33 (06)
  • [3] An improved rapid visual screening method for seismic vulnerability assessment of reinforced concrete buildings in Indian Himalayan region
    Aggarwal, Yati
    Saha, Sandip Kumar
    [J]. BULLETIN OF EARTHQUAKE ENGINEERING, 2023, 21 (01) : 319 - 347
  • [4] Seismic performance assessment of reinforced concrete hilly buildings with open story
    Aggarwal, Yati
    Saha, Sandip Kumar
    [J]. STRUCTURES, 2021, 34 : 224 - 238
  • [5] [Anonymous], 2010, CODE SEISMIC DESIGN
  • [6] [Anonymous], 2010, Code for design of concrete structures (GB50010-2010)
  • [7] [Anonymous], 2013, OPEN SYSTEM EARTHQUA
  • [8] Site investigation on seismic performance of 7 isolated buildings during the 2022 Luding Ms 6.8 earthquake
    Bai, Wen
    Dai, Junwu
    Liu, Rongheng
    Shao, Zhipeng
    Yang, Yongqiang
    Jiang, Tao
    Zhou, Baofeng
    [J]. JOURNAL OF BUILDING ENGINEERING, 2024, 89
  • [9] Direct Displacement-Based Design of Buildings with Different Seismic Isolation Systems
    Cardone, D.
    Palermo, G.
    Dolce, M.
    [J]. JOURNAL OF EARTHQUAKE ENGINEERING, 2010, 14 (02) : 163 - 191
  • [10] Material Model Parameters for the Giuffre-Menegotto-Pinto Uniaxial Steel Stress-Strain Model
    Carreno, R.
    Lotfizadeh, K. H.
    Conte, J. P.
    Restrepo, J. I.
    [J]. JOURNAL OF STRUCTURAL ENGINEERING, 2020, 146 (02)