Electroplating Additively Manufactured Honeycomb Structures to Increase Energy Absorption Under Quasi-Static Crush

Honeycomb (HC) has been used in energy absorption applications due to its high stiffness and low density. Metallic HC are used for energy absorption applications, however, these metallic structures can be challenging to manufacture if complex geometric features designed to improve energy absorption are used, which motivates the use of additive manufacturing (AM). Metal AM methods include powder bed fusion (PBF) and direct energy deposition (DED). In addition to capital equipment cost, these processes possess challenges that include a required inert environment, powder handling, final part porosity, residual stresses, and nonuniform surface finish. These concerns can be alleviated through the use of polymer AM, however, polymeric parts exhibit brittle failure and have a lower stiffness than metallic HC structures. In this study, a low-cost 3D polymer printing method, stereolithography (SLA), is combined with a conventional electroplating process to fabricate a metal -plastic composite HC structure with energy absorption capability much greater than of a plastic HC structures of the same nominal volume. SLA parts have a smooth surface, so that the surface finish is at least as uniform after electroplating as the SLA part. The energy absorption characteristics of the electroplated HC is studied to determine how these energy absorbing materials can be manufactured at reduced cost. Our study confirms that the metal -plastic composite HC increases both the crush strain range and the mean crush stress of these samples, resulting in metal -plastic composite HC structures with substantially increased energy absorption. This study also examines how buckling initiators (Bls), or diamond shaped holes located at 50, 75, and 100% of the height of the hexagonal cell vertices, can influence energy absorption performance. This study shows that it is feasible to fabricate electroplated HCs, using an SLA preform, to achieve a substantial increase in energy absorption over using SLA alone.