Nickel foam supported CuO/Co3O4/r-GO is used as electrode material for non-enzymatic glucose sensors and high performance supercapacitors

In order to solve the problem of glucose detection in medical development and meet the urgent demand for new energy storage devices, this paper proposes a new material suitable for glucose sensing and capacitive properties. The sensor was fabricated by depositing Co3O4 nanoparticles onto nickel foam with integrated r-GO via the hydrothermal method, followed by the synthesis of CuO nanoparticles using electroplating. The detection range of the sensor is 0.3-11.3 mM. The sensor's sensitivity is 1000.3 mu A mM- 1 cm- 2, indicating its responsiveness to changes in analyte concentration. In electrochemical test systems, Signal-to-Noise Ratio (SNR) usually represents the relative intensity of the effective current signal and the background noise, reflecting the accuracy and reliability of the measurement. When the SNR is three, the minimum detection limit is 0.431 mu M, highlighting its ability to reliably detect analytes at low concentrations amidst background noise. According to electrochemical workstation tests, the sensor demonstrates robust stability. Furthermore, the electrode material proves suitable for asymmetric supercapacitor devices, when the current density is 2 Ag-1, the specific capacitance is 660.5 Fg- 1. At the same time, we also explore the cyclic stability of the device, which can retain 92.3 % of its initial specific capacitance after 5000 cycles, showing its remarkable long-term stability. In addition, the prepared nanocomposites can also light the red LED light. The results show that the synthesized CuO/Co3O4/r-GO/NF electrode can be used for electrochemical glucose sensing and supercapacitors, and plays an important role as a multifunctional material in the fields of medical, food, electronics, transportation and energy, providing key technical support for a variety of applications.